TV, computer, printer (continued)
The computer does not recognize the card (it only reads the built-in memory).
●
Disconnect the USB connection cable (supplied) and reconnect with a card in place.
The computer does not recognize the card. (When using SDXC Memory Cards)
→ Check whether your computer is compatible with SDXC Memory Cards.
→ A message prompting you to format the card may appear when you connect it. Do not format the
card.
→ If the [Access] indicator on the monitor does not go off, switch off the camera before disconnecting
the USB connection cable.
Printing is not possible when connected to a printer.
●
The printer is not compatible with PictBridge.
●
Set [USB Mode] to [PictBridge(PTP)] (→58).
The edges of pictures are cut off when printing.
●
Cancel any trimming or edgeless printing settings on the printer before printing.
(Consult the printer's instructions.)
●
The pictures were recorded in
→ If you are having your pictures printed in a shop, check if 16:9 sizes can be printed.
Printing panorama pictures does not succeed.
●
The aspect ratio of panorama pictures is different from that of regular still pictures, and some
panorama pictures may not be printed correctly.
→ Use a printer with support for panorama pictures. (Refer to the instructions for the printer.)
aspect ratio.
- 182 -
Q&A Troubleshooting