■
To switch the playback method for the still pictures recorded in 3D
Select the picture recorded in 3D
Select [2D/3D Settings] in the [Playback Mode] menu and then press [MENU/SET]
(→111)
• The playback mode will switch to 3D if it is playing back in 2D (conventional image),
or it will switch to 2D if it is playing back in 3D.
• If you feel tired, uncomfortable or otherwise strange when playing back pictures
recorded in 3D, set to 2D.
●
On the monitor of this camera, 3D still pictures will be played back in 2D (conventional
pictures).
●
If you switch between 3D still pictures and normal still pictures while playing them back,
the monitor image will be black for a few seconds.
●
If you select a thumbnail of 3D still pictures or display a thumbnail after playing back 3D
still pictures, it may take a few seconds to start playing back or displaying the pictures.
●
Viewing 3D still pictures too close to a TV may cause eyestrain.
●
When a TV has not been converted for viewing 3D still pictures, do the necessary
settings on the TV. (For details about the necessary preparation of the TV, read the
TV's instructions.)
●
When an image is not suitable for 3D viewing (due to excessive parallax, etc.)
• During Slide Show playback: The image is displayed in 2D.
• During [Filtering Play]: A message appears confirming whether to display the image
●
When a 3D image is played back on a TV that is not 3D-capable, 2 pictures may
appear side-by-side on the screen.
●
You can store 3D still pictures on a computer and on some recorders. (→161)
in 3D or not.
- 160 -
Playing back on a TV