Registering My Landmark; Registering My Landmark From A Map - Leica MC-UL427 Instructions Manual

Registering my landmark

You can register a user-defined location that is not registered in this camera as my
landmark in order to display it when positioning is executed or to record it on a picture.
(Up to 50 landmarks)
●
Unless the map data is copied to a memory card, My landmark cannot be registered.
Before registering My landmark, copy the map data on the DVD (supplied) to the
memory card. (→149)
You can register a location specified on a map as My landmark.
Press [MENU/SET] in playback mode
Use the respective cursor buttons to select [Map] menu or
[GPS] menu and press [MENU/SET]
Use the respective cursor buttons to select [My Landmark]
and press [MENU/SET]
Use the respective cursor buttons to select [None] and press
[MENU/SET]
Use the respective cursor buttons to select [Point on map]
and press [MENU/SET]
Display the location that you want to register at the center of
the map and press [MENU/SET]
• Operations available when a map is displayed (→145)
Press [MENU/SET]
Enter my landmark name
●
You can use the GPS to register your current location as My landmark. If you have
moved to a location where positioning is enabled and when positioning is executed
successfully before starting the My landmark registration procedure, the current location
will be displayed at the center of the map.

Registering my landmark from a map

(Entering text: →94)
- 152 -