Using The "Gps Assist Tool - Leica MC-UL427 Instructions Manual

■
Using "GPS Assist Tool" by connecting the camera and computer
Preparation: Turn on the computer and close all other open application programs.
Press [MENU/SET]
Use the respective cursor buttons to select [GPS] menu and
press [MENU/SET]
Use the respective cursor buttons to select [Assist Data] and
press [MENU/SET]
Use the respective cursor buttons to select [Update] and
press [MENU/SET]
Use the respective cursor buttons to select [Connect USB]
and press [MENU/SET]
Connect the camera to a computer
[Access] (sending data)
• Do not disconnect
the USB connection
cable while [Access] is
displayed.
Start up the "GPS Assist Tool" on your computer and update
the GPS assist data
The GPS assist data of the camera is updated.
Terminate the connection between the camera and computer
and disconnect the USB connection cable
●
You can also update the assist data if you select [GPS assist data] for [USB Mode] (→58)
when you connect the camera to a computer.
●
Do not use any other USB connection cables except the supplied one.

Using the "GPS Assist Tool"

USB connection cable
(always use the supplied cable)
(→143)
- 141 -
Reducing the time required for positioning
Make sure the plug is aligned correctly
and that it is inserted straight.
(Otherwise the connectors may be bent
out of shape which will cause trouble.)