Picture Recording Modes; Serial Exposures - Leica M10-R Instruction Manual

PICTURE RECORDING MODES

EN

SERIAL EXPOSURES

The camera is set to single shot exposures (
exposures can also be created to e.g. capture motion sequences at
various stages.
▸ Select
Drive Mode Drive Mode
▸ Select the desired setting
(
Continuous Low Speed Continuous Low Speed
Once you have finalized your settings, the camera will take serial
exposures as long as you keep the shutter button pressed down
fully (and you have sufficient space on your memory card).
84
) by default. Serial
Single Single
in the main menu
, )
Continuous High Speed Continuous High Speed
Notes
• We recommend deactivating the preview mode (
when using this function.
• The specified picture sequence stated in the technical
information refers to a default setting (
Frequency and number may vary depending on the settings, the
image content, the
White Balance White Balance
used.
• Regardless of how many pictures were taken in a series, the last
picture in the series or the last picture saved on the memory
card while the save process is ongoing will be displayed first in
both review modes.
• Serial exposures with
Continuous High Speed Continuous High Speed
frequency of max. 4.5 fps, provided shutter speeds of 1/60 s or
faster are used.
• Serial exposures are not possible if a flash is used. Only a single
picture will be taken if the flash function is activated.
• Serial exposures are not available in combination with the
self-timer function.
• The buffer memory of the camera only allows a limited number
of exposures in series and in the selected exposure frequency.
The exposure frequency is reduced, once the capacity limit of
the camera's buffer memory is reached.
)
Auto Review Auto Review
, JPG format
ISO 200 ISO 200 L-JPG L-JPG
setting and the memory card
set are taken at a
).