Back-Up Roller, Transfer Roller - Oki OKIFAX 5750 Service Manual

4.3.26 Back-up Roller, Transfer Roller

1. After removing the Lower Base, remove
the spring.
2. Lift the left side of the Back-up Roller and
pull it out leftwards.
Caution:
- Do not lose the ground washer.
- Do not bend the ground plate.
- Do not damage the backup roller.
3. Release the gear by unlocking the latch
on the Lower Base.
4. Lift the right side of the Transfer Roller
and shift rightwards, then pull it out from
the Lower Base.
Service Guide OKIFAX 5750/5950
Chapter 4 Disassembly
Page: 192