Some options of the DIALING OPTIONS menu cannot be selected depending on the destination of
delivery, machine specs, and machine settings. However, numbers related to speed access are
fixed.
If there are unselective options, these numbers become discontinuous.
*1: This setting can be skipped when ISDN board is installed. (However, this setting can be made
only when service bit is set to ON.)
Setting values are defined for each country code.
For more details, see Section 2.9.6, "Defaults."
The setting data must be transferred to the G3 Option.
No.
Item
40
Redial tries
41
Redial Interval
42
Auto Start
Specifications
Sets on the redial tries to meet the regulations of the installed country.
1) Setting values
Country code =
Other than FRE: 0-10 (in one-try steps)
FRE: 1-5 (in one-tray steps)
Set an automatic redialing interval to meet the regulations of installed
country.
1) Setting values
Country code =
Other than FRE: 1-6 (in one-minute steps)
FRE: 1-12 (in one-minute steps)
Determine whether a call is to be originated automatically without
pressing the START key after specifying a destination with a speed dial
key.