Lan Options (1/2) - Oki OKIFAX 5750 Service Manual

2.9.5.7 LAN Options (1/2)

Setting values are defined for each default type.
The settings listed below can be made only when a LAN option is installed. When it is not
installed, none of LAN-related setup items can be selected. None of them can be selected
during NIC initialization. (FUNC NOT AVAIL.)
No. Item
80 Auto Tray SW.
81 Paper Size Check
82 LAN Print T.O.
Service Guide OKIFAX 5750/5950
Chapter 2 Installation
Specifications
Determine whether the current tray is automatically switched to
another tray when the current tray runs out of paper in the LAN
print mode.
This setting can be made only when the second tray is installed.
1) Setting values
ON (Switched)/OFF (Not switched)
* Setting enabled when NIC TYPE 1/TYPE 2 is installed.
Determine whether the set paper size is to be checked against the
host-specified paper size in the LAN print mode.
1) Setting values
ON (Checked)/OFF (Not checked)
* If the two paper sizes do not match, the machine takes the following
action:
ON: Issues a paper request directly before starting printing and
detects the paper size and jam after starting printing.
OFF: Does not issues a paper request directly before starting printing
nor detect the paper size and jam after starting printing.
* Setting enabled when NIC TYPE 1/TYPE 2 is installed.
Set the time from job start to job end during which image data
storage in the image memory (from LAN) should be completed.
If this time is expired, LAN printing will be interrupted.
1) Setting values
5 sec/30 sec/5 min selectable
* Setting enabled when NIC TYPE 1/TYPE 2 is installed.
Page: 137