Oki OKIFAX 5750 Service Manual page 285

Service Personnel Initial Settings Table 2.9.2.3 (3/11)
T.F. Item
No.
06 TAD mode
(For external telephone answering
device.)
Service Guide OKIFAX 5750/5950
Chapter 2 Installation
Specifications
Switches between TAD modes.
This setting is required to determine whether TAD is to
be selected in the AUTO ANSWER mode and set the
fax operation to be performed after completion of
TAD-side operation (response).
In the TAD mode, a message is recorded in the
telephone memory if the telephone (connected
externally) answers automatically when the facsimile
is ready for reception.
After completion of message recording, the line is
switched to the facsimile.
If CNG is detected while the telephone is answering
automatically, reception starts immediately.
1) Setting values
OFF/TYPE1/TYPE2/TYPE3 selectable.
* Relationships between settings and operations are
as follows:
OFF: TAD cannot be selected in the AUTO
ANSWER mode.
TYPE1: When TAD operation ends without detecting
CNG, the line is switched to the
facsimile starting reception immediately.
TYPE2: After completion of TAD operation, the
machine returns to the standby state.
TYPE3: The machine starts detecting CNG 15
seconds after the telephone starts the
auto answering operation.
If TAD operation ends without detecting
CNG, the machine returns to the standby
state.
Page: 102