Contact Assembly And High-/Low Voltage Power - Oki OKIFAX 5750 Service Manual

4.3.13 Contact Assembly and High-/Low Voltage Power Supply Boards
1. Remove the high-/low voltage
power supply boards by
unscrewing seven screws.
Caution: Remove both boards at
the same time. Unscrew one
ground screw and remove the
ground cable from the AC inlet.
2. Disconnect two connectors to
separate two boards.
3. Remove the contact assembly.
Caution: Never touch the pattern
on the low-voltage board.
Copyright 2000, Oki Data, Division of OKI America, Inc. All rights reserved. See the Oki Data Business Partner Exchange
(BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OKIFAX 5750/5950
Chapter 4 Disassembly
Page: 178