3.3.2 TQSB2 PCB
(1) Remove the pulse motor (see 3.3.1).
(2) Remove the connector O from the TQSB-2 PCB P.
(3) Remove the screw Q and remove the TQSB-2 PCB P.
Note:
Refer to Detail A in the previous section.
Copyright 2000, Oki Data, Division of OKI America, Inc. All rights reserved. See the Oki Data Business Partner Exchange
(BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OKIFAX 5750/5950
Chapter D Second Paper Feeder
Page: 330