Location Program (2/2) - Oki OKIFAX 5750 Service Manual

2.9.4.1 Location Program (2/2)

No. Item
3 Batch TX time
4 Forwarding No.
5 Forward ON P-ERR.
Service Guide OKIFAX 5750/5950
Chapter 2 Installation
Specifications
Set a batch transmission time (24-hour system). When a time is
specified, locations can be specified during batch transmission
operation.
1) Number of batch TX times that can be registered OKIFAX
5750/5950: 10 (Speed dial numbers 31-40 are assigned.)
* Registration is enabled if the specified speed dial is not registered in
the remote machine.
2) Specifiable time range
00:00 to 23:59 (Date cannot be specified.)
Specify the destination of forwarding for incoming call. When the
transfer destination telephone number is set, FWD can be specified in
the AUTO ANSWER mode.
1) Number of forwarding destination that can be specified
OKIFAX 5750/5950: 1
* The HYPHEN key is prohibited when country code
is set to FRE.
2) Number of characters used to specify a destination 40 characters
(ten-keys 0-9/*/#/PAUSE/HYPHEN/SPACE/+)
This will be the object of collection of closed network service.
Specify the destination of forwarding for no toner/no paper reception.
When the transfer destination telephone number is set, Forwarding can
be transmitted to the specified destination at the time of message in
memory for no toner/no paper condition.
1) Number of forwarding for no toner/no paper reception destination
that can be specified FX-056/FX-176: 1
2) Number of characters used to specify a destination 40 characters
(ten-keys 0-9/*/#/PAUSE/HYPHEN/SPACE/+)
Page: 118