Ac Cord Connection - Oki OKIFAX 5750 Service Manual

2.6 AC Cord Connection

The power supply is provided as follows.
Normal input voltage 120V AC (Voltage range 102 to 127V AC)
Normal input voltage 230V AC (Voltage range 198 to 250 V AC)
Check whether the AC voltage of your input is within the above-mentioned voltage range and if so, check that
the power switch is turned OFF. After turning off the power switch, connect the female plug of the AC cord
to the machine and insert the male plug of the AC cord to the inlet receptacle.
Turn the power switch ON and check that the display shows "(TIME and MEMORY FREE 100%)" message indicating the standby mode.
Copyright 2000, Oki Data, Division of OKI America, Inc. All rights reserved. See the Oki Data Business Partner Exchange
(BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OKIFAX 5750/5950
Chapter 2 Installation
Page: 81