Table 1.5.1 (1/8) Basic Performance Specifications - Oki OKIFAX 5750 Service Manual

Table 1.5.1 (1/8) Basic Performance Specifications

No. Item
1
Applicable line
2
Line interface
1) Impedance
2) Sending power level
3) Receiving power level
3
Type of document to be
transmitted
1) Width
2) Length
3) Thickness
4) Shape
5) Opacity
Service Guide OKIFAX 5750/5950
Chapter 1 General Information
Specifications
1) PSTN (Public switched telephone network)
2) PBX (Private branch exchange)
3) ISDN (Integrated services digital network): Option
4) LAN (Local area network): Option
5) E-mail Internt Fax (via LAN): Option
600 ohm balanced
Note: Impedance may differ by the requirement of PTT.
0 dBm to -15 dBm range
(Adjustable in 1 dB steps. Technical Setup No. 21)
0 dBm to -40 dBm
(In case of V.34 TX/RX, -3 to -43 dBm
Max. 216 mm (NA Letter)
Min: 148 mm (ISO A5 size)
Note: Effective reading width is NA Letter (215 mm)
Min. 128 mm
Max. 356 mm (14 inches)
Long document detection: 380 mm, or 150 mm
* Technical Setup No. 10 (To enable or disable the long
document scanning)
Based on common bond paper
a) 0.08 to 0.13 mm for multiple page feeding
b) 0.06 to 0.15 mm for single page feeding
Rectangular
Documents allowing less than 40% of the scanner source light
Page: 11