Table of Contents
Advertisement
● Remove an application from the port forwarding list. (See
Port Forwarding for an
Port Forward Panel: Enabling Port Forwarding
Before you can use or configure Port Forwarding, you must enable it.
1. Log in to the home page.
2. Click Advanced settings > Router > Basic.
3. Next to Port Forwarding, select Enable.
4. Click Save.
Port Forward Panel: Enabling Port Forwarding for an Application
You can enable port forwarding for certain application types.
1. Make sure you've enabled port forwarding. (See
Forwarding.)
2. Click Advanced settings > Router > Port Forward.
3. In the last row of the table, click the Application field, and select the application type
from the list.
The values for Start and End ports are automatically filled in.
4. If necessary, change the range of port numbers associated with the application. Traffic
will be allowed (not blocked) if its destination port number is in the specified range.
In the Start field, enter the number that starts the port range.
In the End field, enter the number that ends the port range.
If the range consists of only one port, enter the number that you entered in the Start
field.
5. In the Protocol list, click the protocol(s) used for this application (TCP, UDP, or both).
6. In the IP Address field, enter the IP address of the server to be accessed.
7. Make sure Enable is selected.
8. Click Add.
9. Click Save.
Port Forward Panel: Disabling Port Forwarding for an Application
You can disable port forwarding for certain application types.
Device Settings
Application.)
100
Port Forward Panel: Disabling
Port Forward Panel: Enabling Port
Advertisement
Table of Contents
