Message; Answering - Tadiran Telecom SLT User Manual

Message: Answering
Messages can be left by a caller or voice mail. Retrieving a message can be performed either as a Hotline
(automatically) or manually. Which method applies is defined system-wide.
The message type for your system can be identified when the handset is lifted as follows:
• Ringback tone - Hotline
• Distinctive dial tone or confirmation dial tone (defined system-wide) - manually
A message waiting can be indicated in one of two ways:
• Periodic ringing
• Illuminated message waiting lamp (when installed in your telephone)
To automatically receive Hotline Message:
1. Lift handset.
2. Listen for the ringback tone.
3. Wait for answer.
To manually receive Message:
1. Lift handset.
2. Listen for the distinctive dial tone.
3. Dial Message feature code#175.
4. If your Listen for the dial tone, dial activation code
5. Listen for the ringback tone.
6. Wait for answer.
Note:
If your telephone is not provided with a message waiting lamp the message feature code #175 must be
followed by dialing activation code
Message: Answering
.
.
66
#175 or #5
SLT User Guide