Malicious Call Trace - Tadiran Telecom SLT User Manual

Malicious Call Trace

Details of incoming calls can be recorded using Malicious Call Trace. They are added to the record when your station
rings even if you do not answer. The number of calls stored for your station is defined by your system administrator.
When this number is exceeded, details of the next call received replace the oldest record.
Details of calls are recorded until you cancel the feature. The details recorded are:
Originating number (for external calls: ANI if available, else trunk number), your station number and the time of calls.
To activate malicious call trace:
1. Lift handset.
2. Dial feature code #1740.
3. Listen for the dial tone.
4. Dial the activation code
5. Listen for the confirmation tone.
6. Hang up.
Note:
Should you hear a reorder tone, Malicious Call Trace is denied at your station (as defined by the Class of
To use the feature, request the Attendant to activate Malicious Call Trace at your station.
Service).
To cancel malicious call trace:
1. Lift handset.
2. Dial feature code #1740.
3. Listen for the dial tone.
4. Dial the cancellation code
5. Listen for the confirmation tone.
6. Hang up.
Malicious Call Trace
.
.
64
#1740
SLT User Guide