Individual Remote System Services (Freedom) - Tadiran Telecom SLT User Manual

Individual Remote System Services (IRSS) - Freedom
Placing IRSS calls
• For IRSS calls placed from phones that send Caller ID, the IRSS feature must be enabled at your Coral station. See
steps below.
• For IRSS calls placed from phones that do not send Caller ID information, the IRSS feature must be enabled using
the Executive Privilege feature. See
To place a call from IRSS phone providing Caller ID:
1. Place a call to your Coral station.
2. Listen for a distinctive dial tone.
3. Dial your 4 digit passcode (if required by Class of Service).
4. Listen for the dial tone.
5. Dial the required destination number.
Possible destinations can be: external number (stationary or cellular), network number, or a Coral destination,
including station, trunk/trunk group, dial service, routing access, public/private library, or voice mail.
Note:
If your destination is an external number, it should be preceded by an external line access code.
• If your destination is voice mail (IVR access code), skip to
• If your destination is a FlexiCall All feature, skip to
• To enable another IRSS phone, skip to
6. Listen for the ringback tone.
7. Wait for an answer.
8. You can activate any of the options described in the table on
Individual Remote System Services (IRSS) - Freedom
page 56.
page
page 61.
55
page 59.
60.
page 57.
SLT User Guide