Appendix B - Tones - Tadiran Telecom SLT User Manual

While using the Coral communication system, many different tones will be heard. These tones may vary for
different locations as each system is customized during installation. Therefore, the sound of the tones are not
described; instead, their general use is discussed below. In order to familiarize yourself with these tones, try
accessing various features and listen to the resultant tone signals. The most frequently heard tones are:
Break-In/Break-Out
Tone
Break-In Warning
Tone
Busy (Engaged) Tone
Call Waiting Tone
Confirmation Tone
Distinctive Dial Tone

Appendix B - Tones

Appendix B - Tones
Warning tone received by a station user indicating that a third party has broken into or is
leaving (breaking out) an existing conversation.
Background tone heard during the entire break-in period. Indicates that a third party is
listening. (Not used in North America.)
When the destination you have dialed (extension or trunk) is busy.
Tone heard while engaged on a call indicating that another call is waiting to be answered.
Tone heard when you have successfully accessed or activated a feature (for example Camp-
On, or Call Forward).
The Distinctive Dial Tone (DDT) indicates that certain features are in use at your
telephone, for example when you have programmed your telephone not to receive calls
with either Call Forward All or Do Not Disturb, and you lift the handset. DDT is also heard
between patterns of digits when dialing certain features, for example Account Code
features. When the following features are applied at your telephone, the distinctive dial
tone will be heard when the handset is lifted from idle:
•Call Forward All
•Do Not Disturb
•Messages
•Secondary COS
B-1 SLT User Guide