Message; Answering - Tadiran Telecom SLT User Manual

Message: Answering
Messages can be left by a station caller or voice mail.Retrieving a message can be performed either as a Hotline
(automatically) or manually. The same answering method is defined system-wide.
The message type for your system can be identified when the handset is lifted as follows:
• Ringback tone - Hotline
• Distinctive dial tone or confirmation dial tone (defined system-wide) - manually
A waiting message can be indicated in one of two ways:
• Periodic ringing
• Illuminated message waiting lamp (when installed in your telephone).
To automatically receive Hotline Message:
1. Lift handset.
2. Listen for the ringback tone.
3. Wait for answer.
To manually receive Message:
1. Lift handset.
2. Listen for distinctive dial tone.
3. Dial Message feature code #175.
4. If you listen for dial tone, dial activation code
5. Listen for the ringback tone.
6. Wait for answer.
Note: If your telephone is not provided with a message waiting lamp, the message feature code #175 must be
followed by dialing an activation code

Message

Answering

.
.
80
#175 or #5
SLT User Guide