1. Manuals
  2. Brands
  3. Tadiran Telecom Manuals
  4. Telephone
  5. SLT
  6. User manual

Tadiran Telecom SLT User Manual

Single line telephone
Hide thumbs Also See for SLT:
Table of Contents

Advertisement

Quick Links

See also: User Manual
.
SLT

Single Line Telephone

User Guide
(Version 14.66)
The flexible way to communicate

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SLT and is the answer not in the manual?

Questions and answers

Related Manuals for Tadiran Telecom SLT

Summary of Contents for Tadiran Telecom SLT

  • Page 1: Single Line Telephone

    Single Line Telephone User Guide (Version 14.66) The flexible way to communicate...
  • Page 2 If you have encountered an error, please notify the Manufacturer. All specifications are subject to change without prior notice. © Copyright by TADIRAN TELECOM BUSINESS SYSTEMS LTD., 1993-2004. All rights reserved worldwide. Protected by U.S. Patents 6,594,255; 6,598,098; 6,608,895; 6,615,404...

  • Page 3: Table Of Contents

    Submitting Request to Speak......49 Broker/Consultation/Three-Way Conference Call 19 Forced Release of a Participant ....... 50 Call Forward ............21 Forced Release of an Entire Group Call..51 Caller ID Control ..........24 Hold ..............52 Table of Contents SLT User Guide...
  • Page 4 Appendix A - Glossary ........A-1 Receiving Calls............. 77 Appendix B - Tones ........... B-1 Relay (Accessory)..........78 Appendix C - Dial Tone Pad - Feature Codes ... C-1 Reminder .............. 79 Room Status............81 Table of Contents (cont.) SLT User Guide...

  • Page 5: Introduction

    Coral supports for standard telephones. Use of this guide is straightforward, with each feature listed separately. Certain features have various user options. In this case all of the options are listed under the major feature name; examples of this are ACD & UCD Groups, Boss Group and Speed Dialing. Introduction SLT User Guide...

  • Page 6: List Of Feature Codes

    Call Forward No Answer External....... #17708 Cancellation Code ........ #10, # 0, or Call Forward Timed..........#1984 Class of Service (COS) Switchover ......#149 Call Forward Timed External ......#17709 Exclusive Hold ............#187 Privacy ............#186 or #6 List of Feature Codes SLT User Guide...

  • Page 7: Enabling Voice Mail (Ivr) Commands

    Forced Release of an Entire Group Call ....#1447 Passcode ..............#179 Forced Release of a Participant......#1446 Phone Dial Lock............#148 Hold ..............#171 or #4 Pick Up, Group..........#181 or 76 Pick Up, Directed ..........#180 or 77 List of Feature Codes (cont.) SLT User Guide...
  • Page 8 Security Line ............#17700 Series Call..........Hookflash #195 Silent Monitor: 1-Way (Split) ............#1448 2-Way..........Hookflash 9, #1981 Speed Dialing: Programming Private Library ....#193 Stop Dial................# Transfer .............Hookflash Wakeup ..............#173 Whisper Page: Activation ...............#1744 Receiving: Turning On/Off........#1745 List of Feature Codes (cont.) SLT User Guide...

  • Page 9: Account Code (As Required)

    Depending upon your system definition up to 16 digits are available for Account Numbers. Only one account number entry is allowed per call. Any additional numbers will be refused and the reorder tone heard. Account Code (as required) SLT User Guide...

  • Page 10: Account Code (Forced)

    2. Dial a Speed Call library number. 3. Dial account number. Note: Should you dial a wrong account number when VFAC is installed in your system, the reorder tone will be heard followed by disconnect. Account Code (Forced) SLT User Guide...

  • Page 11: Acd & Ucd Groups

    Wrap-Up Code - for ACD Group ....Wrap-Up Time On/Off ..... ACD & UCD Groups SLT User Guide...
  • Page 12 Only one ID number is allowed per station. Any additional Load ID will replace the current one. The ID number can be changed as many times as needed. ACD & UCD Groups: Load ID - for ACD Group SLT User Guide...
  • Page 13 3) If you log-out from your primary group using this feature code, you must also log-out as primary, so the group is no longer marked as your primary (see page ACD & UCD Groups: Log-In/Out - for a Single ACD Group SLT User Guide...
  • Page 14 Note: After logging out so the group is no longer marked as primary, you must remain logged in as a member of the group (see page ACD & UCD Groups: Primary Log-In - for ACD Group SLT User Guide...
  • Page 15 To resume connection with all ACD/UCD groups: 1. Lift handset. 2. Dial feature code #1975. 3. Listen for the dial tone. 4. Dial cancellation code 5. Listen for the confirmation tone. 6. Hang up. ACD & UCD Groups: Release/Resume from All Groups SLT User Guide...
  • Page 16 2. Dial Release/Resume UCD Group feature code #1991. 3. Listen for the dial tone. 4. Dial your UCD Group number. 5. Dial cancellation code 6. Listen for the confirmation tone. 7. Hang up. ACD & UCD Groups: Release/Resume from a UCD Group SLT User Guide...
  • Page 17 5. Listen for the dial tone. 6. Dial the required wrap-up code (4 digits). List of Wrap-Up Codes 7. Listen for the confirmation tone. 8. Hang up. Wrap-up Code Meaning ACD & UCD Groups: Wrap-Up Code - for ACD Group SLT User Guide...
  • Page 18 To cancel Wrap-Up Time: 1. Lift handset. 2. Dial Wrap-Up Time feature code #1976. 3. Listen for the dial tone. 4. Dial cancellation code 5. Listen for the confirmation tone. 6. Hang up. ACD & UCD Groups: Wrap-Up Time On/Off SLT User Guide...

  • Page 19: Auto Set Relocate

    When defined for permanent relocation, this feature enables you to swap phones within the same Coral system by assigning one SLT the profile of the other SLT, and vice versa. All the phone’s properties, numbering, membership in groups, etc. are automatically exchanged.

  • Page 20: Temporary

    The Auto Set Relocate spares you the inconvenience of having to re-enter all the stored speed numbers and to reset previously defined features at your temporary location. This feature enables you to use any SLT available from your Coral system while keeping your unique extension dial number.
  • Page 21 6. Dial your source passcode (4 digits). 7. Listen for the dial tone. 8. Dial cancellation code (no confirmation tone will be heard). 9. Hang up. 10. The destination station reinitializes with its original profile. Auto Set Relocate: Temporary SLT User Guide...

  • Page 22: Boss Group

    The system defined time can include up to two separate time periods, for example, between 12:00pm and 12:30pm and between 6:00pm and 6:30pm, your calls can be forwarded to the group secretary. Use the form below to specify the system-defined time periods. Time Period From Boss Group: Call Forward SLT User Guide...

  • Page 23: Call Forward

    Call Forward for your boss group. Call Forward Feature Codes Type Internal and External Calls External Calls Only #168 #17707 Busy #167 #17706 No Answer #169 #17708 Timed #1984 #17709 Boss Group: Call Forward SLT User Guide...

  • Page 24: Exclusive Hold

    To cancel Exclusive Hold: 1. Lift handset. 2. Dial Exclusive Hold feature code #187. 3. Listen for the dial tone. 4. Dial cancellation code 5. Listen for the confirmation tone. 6. Hang up. Boss Group: Exclusive Hold SLT User Guide...

  • Page 25: Privacy

    6. Hang up. To cancel Privacy: 1. Lift handset. 2. Dial Privacy feature code #186. 3. Listen for the dial tone. 4. Dial cancellation code 5. Listen for the confirmation tone. 6. Hang up. Boss Group: Privacy SLT User Guide...

  • Page 26: Break-In

    This feature enables an authorized user to break into an established two-party call. To break into a busy conversation: 1. Hookflash. 2. Dial Break-In code #3. Note: Both conversing parties will hear the Break-In warning tone. To release Break-In (break-out): 1. Hang up. Break-In SLT User Guide...

  • Page 27: Broker/Consultation/Three-Way Conference Call

    The first hookflash allows you to converse privately with a third party. The second hookflash allows you to speak privately with the original party, while the third party is put on hold. The third hookflash places you in a three-way conversation with all parties. Broker/Consultation/Three-Way Conference Call SLT User Guide...
  • Page 28 2. Dial the third party number and wait for an answer. 3. Hookflash - third party put on hold. When you have concluded your private conversation 4. Hookflash to complete a Three-Way Conference Call. Broker/Consultation/Three-Way Conference Call SLT User Guide...
  • Page 29 Calls arriving at your station can be forwarded to ring at various destinations, depending on the state of the terminal (all, busy, no answer, timed). Your SLT can distinguish between calls arriving from an internal or external source when forwarding. Calls from Internal and External sources can be forwarded to different destinations (See “Internal/External...

  • Page 30: Call Forward

    21), you can distinguish between calls arriving from an internal or external source when forwarding. For each forwarding feature (forward all, when busy, on no answer, etc.), you can program your SLT to forward your calls as follows: • Forward internal and external calls to the same destination •...
  • Page 31 Call Forward at your station. Call Forward Feature Codes Type Internal and External Calls External Calls Only #141 or #8 #17702 Busy #140 #17701 No Answer #142 #17703 Busy/No Answer #147 or #2 #17705 Timed #1985 #17704 Call Forward SLT User Guide...

  • Page 32: Caller Id Control

    Operating this feature overrides this setting on a per-call basis, if permitted by COS. To operate Caller ID Control: 1. Lift handset. 2. Dial Caller ID Control feature code #1444. 3. To restrict, dial activation code 4. To allow, dial cancellation code 5. Make call as required. Caller ID Control SLT User Guide...
  • Page 33 To cancel Camp-On before you are called back: 1. Lift handset. 2. Dial Camp-On Call back feature code #176. 3. Listen for the dial tone. 4. Dial cancellation code 5. Listen for the confirmation tone. 6. Hang up. Camp-On: Call Back SLT User Guide...

  • Page 34: Camp-On

    1. Lift your handset (requested station immediately rings) Should you Listen for the distinctive dial tone, Dial 2 to initiate ringing. Note: The way in which you answer a Camp-on Call Back is defined system-wide. Camp-On: Call Back SLT User Guide...

  • Page 35: Off-Hook - Call Waiting/Call Offer

    When you apply this feature you hear a second ringback tone at your telephone. To Camp-On a busy station while off-hook: 1. Hookflash. 2. Dial 8. 3. Listen for the ringback tone or second ringback tone (defined system-wide). 4. Wait for answer. Camp-On: Off-Hook - Call Waiting/Call Offer SLT User Guide...

  • Page 36: Class Of Service (Cos) Switchover

    1) In order to perform COS Switchover at your telephone, you must first have a defined passcode (see page 74). 2) The selection of secondary COS is denied when your telephone is in Check Out mode. Class of Service (COS) Switchover SLT User Guide...

  • Page 37: Multiparty

    To leave a conference: 1. Hang up. To add a participant to a progressive conference (while connected to station/trunk): 1. Hookflash. 2. Dial assigned conference number 7098-7099. 3. Hang up. Warning tone will be heard by all participants. Conference: Multiparty SLT User Guide...

  • Page 38: Release

    The first to be removed is always the first member who joined the conference, the second to be removed is the second member who joined the conference, and so on. When a member is removed, a warning tone will be heard by all remaining participants. Conference: Release SLT User Guide...

  • Page 39: Do Not Disturb (Dnd)

    2) Should you hear the reorder tone, DND is denied at your station (as defined by Class of Service). In order to use this feature, ask the attendant to activate DND at your station. Do Not Disturb (DND) SLT User Guide...

  • Page 40: Do Not Disturb (Dnd) Override

    To override Do Not Disturb status: 1. Hookflash. 2. Dial override code 3. 3. Listen for the ringback tone. 4. Wait for answer. Note: The override feature uses the same feature code as Break-In. Do Not Disturb (DND) Override SLT User Guide...

  • Page 41: Executive Privilege

    2) In order to use Executive Privilege your station must be defined with a passcode (see page 74). 3) Executive Privilege remains in effect for a single call only. Once the call is completed the telephone returns to its original Class of Service. Executive Privilege SLT User Guide...

  • Page 42: Flash (Calibrated Opening) On Trunk

    In cases where this is required, specific instructions will be given. Use the following lines to write in the ways in which Flash is used in your company’s telephone system: _______________________________________________________________________________________________ _______________________________________________________________________________________________ _______________________________________________________________________________________________ _______________________________________________________________________________________________ _______________________________________________________________________________________________ _______________________________________________________________________________________________ _______________________________________________________________________________________________ Flash (Calibrated Opening) On Trunk SLT User Guide...

  • Page 43: Flexicall

    3) The remote destination does not ring for the following incoming calls: • Group call • Boss Group call (only first member of a Boss Group will ring) • Bell/UNA • Reminder, Wakeup • Voice Page FlexiCall SLT User Guide...
  • Page 44 Internal/External FlexiCall You can distinguish between calls arriving from an internal or external source when operating the FlexiCall feature. You can set your SLT to send your calls as follows: • All, internal and external calls ring at your remote phone •...
  • Page 45 5. Listen for the confirmation tone. 6. Hang up. Note: Should you hear a reorder tone, FlexiCall is denied at your station (as defined by Class of Service). FlexiCall Type Feature Codes #17710 Internal #17711 External #17712 FlexiCall SLT User Guide...
  • Page 46 Answer the FlexiCall call as you would answer a regular call (see your remote phone user guide). Once you have answered a FlexiCall call at your remote destination, you can activate any of the options described in the table on the next page. FlexiCall SLT User Guide...
  • Page 47 You will be disconnected and your conversing party will be transferred to your Coral Divert call to your station. If your station does not answer within the system defined time-out period, station the call will return to your remote phone. FlexiCall SLT User Guide...
  • Page 48 Contact your system administrator for the voice mail (IVR) dial number and voice mail remote access code. Use the table below to record that number and code: Voice Mail (IVR) Voice Mail Remote Dial Number Access Code FlexiCall SLT User Guide...

  • Page 49: Follow Me

    1. Lift handset. 2. Dial Call Forward All (or Call Forward All External) feature code #141 (or #17702). 3. Listen for the dial tone. 4. Dial cancellation code 5. Listen for the confirmation tone, hang up. Follow Me SLT User Guide...

  • Page 50: Forced Release

    4. Dial Break-In code 3. 5. Listen for conversation, then either 6. Hang up if the parties are in conversation and you decide not to release the parties Hookflash and hang up in order to force release. Forced Release SLT User Guide...

  • Page 51: Group Calls (Conference)

    In case of a muted conference, only the Group Call initiator has the right to speak. Other participants can be granted permission to speak by The Group Operator. These options are set in the Group Call definitions. An authorized user can force release a participant or terminate an entire conference. Group Calls (Conference) SLT User Guide...

  • Page 52: Preset Conference Activation

    Forced Release of a Participant ....Forced Release of an Entire Group Call ... Group Calls (Conference) SLT User Guide...
  • Page 53 4. Wait for members to join, hear warning tone (if defined system-wide) every time a member answers. 5. Start speaking. Use the following form to write in your group numbers and destination. Zone/Area/Members Access Code Group Calls: Preset Conference Activation SLT User Guide...
  • Page 54 8. All the called stations start ringing. 9. Wait for members to join, hear warning tone (if defined system-wide) every time a member answers. 10. Start speaking. Note: For Group Call access code, see table on page Group Calls: Temporary Conference Activation SLT User Guide...
  • Page 55 When the group is defined as blocked against joining an ongoing conference, a busy tone is heard. To leave a conference: 1. Hang up. Warning tone is heard by all participants (if defined system-wide). Group Calls: Joining SLT User Guide...
  • Page 56 If neither are registered members, both conversing parties are disconnected. 2) When the group is defined such that no new participant can join an ongoing conference, both conversing parties will be disconnected. The busy tone will be heard. Group Calls: Addition of Participants SLT User Guide...
  • Page 57 To send a request to speak to the Group Operator: 1. Hookflash. 2. Continue attending the current conference. 3. Wait for the Group Operator to ask you to speak. Group Calls: Submitting Request to Speak SLT User Guide...
  • Page 58 To release a single participant: 1. Dial the feature code #1446. 2. Listen for the dial tone. 3. Dial participant number. 4. Dial activation code (no confirmation tone will be heard). 5. Hang up. Group Calls: Forced Release of a Participant SLT User Guide...
  • Page 59 3. Listen for the dial tone. 4. Dial the access code of the required Group Call. 5. Dial activation code (no confirmation tone will be heard). 6. Hang up. Group Calls: Forced Release of an Entire Group Call SLT User Guide...

  • Page 60: Hold

    2) If you do not return to the call within a predetermined amount of time the call will automatically ring back at your station. 3) If your telephone is programmed with Hard Hold, when hold is activated on a call, your station will be considered busy for additional incoming calls. Outgoing calls, however, can still be made. Hold SLT User Guide...

  • Page 61: Hot Line (Immediate/Delayed)

    Note: When dial tone is heard, you can dial the other number to override the feature. 3. Wait for a certain period of time until the hot line destination rings. 4. Wait for answer. Hot Line (Immediate/Delayed) SLT User Guide...
  • Page 62 To cancel an IRSS destination: 1. Lift handset. 2. Dial IRSS feature code #17714. 3. Listen for the dial tone. 4. Dial cancellation code 5. Listen for the confirmation tone. 6. Hang up. Individual Remote System Services (IRSS) - Freedom SLT User Guide...

  • Page 63: Individual Remote System Services (Freedom)

    • To enable another IRSS phone, skip to page 6. Listen for the ringback tone. 7. Wait for an answer. 8. You can activate any of the options described in the table on page Individual Remote System Services (IRSS) - Freedom SLT User Guide...
  • Page 64 • To enable another IRSS phone, skip to page 6. Listen for the ringback tone. 7. Wait for an answer. 8. You can activate any of the options described in the table on page Individual Remote System Services (IRSS) - Freedom SLT User Guide...
  • Page 65 Your number will not show on the divert party’s display. Access voice For instructions on accessing voice mail from an IRSS phone, refer mail/IVR page Individual Remote System Services (IRSS) - Freedom SLT User Guide...
  • Page 66 2. Dial the third party number and wait for an answer. 3. Dial 2. The third party is put on hold. 4. When you have concluded your private conversation, dial 2 to complete a 3-way Conference call. Individual Remote System Services (IRSS) - Freedom SLT User Guide...
  • Page 67 Contact your system administrator for the voice mail (IVR) dial number and voice mail remote access code. Use the table below to record that number and code: Voice Mail (IVR) Voice Mail Remote Dial Number Access Code Individual Remote System Services (IRSS) - Freedom SLT User Guide...
  • Page 68 5. Listen for the confirmation tone. To cancel the FlexiCall All feature from your IRSS phone: 1. Repeat steps 1-3 above. 2. Dial cancellation code 3. Listen for the confirmation tone. Individual Remote System Services (IRSS) - Freedom SLT User Guide...
  • Page 69 To cancel the IRSS feature from an IRSS phone: 1. Repeat steps 1-4 above. 2. Dial cancellation code 3. Listen for a short burst of confirmation tone. IRSS is cancelled at your station. Individual Remote System Services (IRSS) - Freedom SLT User Guide...

  • Page 70: Last Number Redial

    When dialing over an outgoing trunk, in some cases the Last Number Redial feature code must be followed by a Forced Account code. When Forced Account code is required the distinctive dial tone will be heard after dialing #143 or pressing Last Number Redial SLT User Guide...

  • Page 71: Making Calls: External And Internal

    6) Some systems might be programmed with a limit on duration of outgoing external calls. Once the predefined limit is reached, the call will be automatically disconnected. To make internal calls: 1. Lift handset. 2. Dial station number. 3. Listen for the ringback tone. 4. Wait for answer. Making Calls: External and Internal SLT User Guide...

  • Page 72: Malicious Call Trace

    Service). To cancel malicious call trace: 1. Lift handset. 2. Dial feature code #1740. 3. Listen for the dial tone. 4. Dial the cancellation code 5. Listen for the confirmation tone. 6. Hang up. Malicious Call Trace SLT User Guide...

  • Page 73: Malicious Call Trace Printout

    Originating number (for external calls: ANI if available, else trunk number), your station number and the time of calls. 3) The listing is not deleted when printed out. It can be reprinted later, including subsequent updates. Malicious Call Trace Printout SLT User Guide...

  • Page 74: Message

    4. If your Listen for the dial tone, dial activation code 5. Listen for the ringback tone. 6. Wait for answer. Note: If your telephone is not provided with a message waiting lamp the message feature code #175 must be followed by dialing activation code Message: Answering SLT User Guide...

  • Page 75: Living/Cancellation

    Hookflash 5, #175 or #5, #1440 Messages can be left at either FlexSet or SLT stations with message lamp, at station groups, or at network numbers. The originator of a message can also cancel the message. A message left to a boss group turns ON the message lamp of the first boss group member only.

  • Page 76: Night Answer (Central Bell/Una Pickup)

    2. Dial Directed Call Pickup feature code #180. 3. Listen for the dial tone. 4. Dial the number of the ringing bell. 5. Answer the call. Note: UNA (Universal Night Answering) Pickup is also known as Bell Pickup. Night answer (Central Bell/UNA Pickup) SLT User Guide...

  • Page 77: Page_Q

    Usually announcing a call for pick up includes both the name of the person being notified and the relevant Page_Q number. Note: If the call is not picked up within a predetermined time, it will automatically return to the originating station from which Page_Q was placed. Page_Q SLT User Guide...

  • Page 78: Paging

    To page: 1. Lift handset. 2. Dial Public Address Paging access code. 3. Announce your message. 4. Hang up. Paging: Public Address - Access Code Location/Area Access Code 7074 7075 7076 7077 7078 7079 Paging: Public Address SLT User Guide...

  • Page 79: Voice (To Single Flexset)

    To voice page a single FlexSet that is either busy or does not answer: 1. Hookflash during the call. 2. Dial Voice Page code 6. 3. Listen for the Voice Page tone. 4. Begin paging when tone stops. 5. Hang up. Paging: Voice (To Single FlexSet) SLT User Guide...

  • Page 80: Zone (To Flexset Group)

    2. Dial the Zone Page access code. 3. Listen for the Voice Page tone. 4. Begin paging when tone stops. 5. Hang up. Location/Area Access Code 7300 7301 7302 7303 7304 7305 7306 7307 7308 7309 Paging: Zone (To FlexSet Group) SLT User Guide...

  • Page 81: Park

    Page_Q feature be used instead (see page 69). 2) If the parked call is not picked up within a predetermined time, the call will automatically return to the originating station from which the park was made. Park SLT User Guide...

  • Page 82: Passcode

    CAUTION ! Once a passcode has been defined, the code is known only to you and the system administrator. If you forget the passcode you will not be able to utilize the features that require the code. Therefore, write your passcode number in a secure place for future reference. Passcode SLT User Guide...

  • Page 83: Phone Dial Lock

    4. Dial your passcode (4 digits). 5. Dial cancellation code 6. Listen for the confirmation tone. 7. Hang up. Note: In order to dial lock your telephone, you must first have defined a passcode (see page 74). Phone Dial Lock SLT User Guide...

  • Page 84: Pickup: Group, Directed

    To answer any call within the system: 1. Lift handset. 2. Dial Directed Call Pickup feature code #180. 3. Listen for the dial tone. 4. Dial the number of the ringing phone. 5. Answer the call. Pickup: Group, Directed SLT User Guide...

  • Page 85: Receiving Calls

    (or solely incoming) calls that were handled by your phone. The calls are sorted by date and time. For more information refer to the Caller ID display unit Operation Guide. Receiving Calls SLT User Guide...

  • Page 86: Relay (Accessory)

    3. Listen for the dial tone. List of External Devices and Relay Codes 4. Dial cancellation code 5. Listen for the confirmation tone. External Device Relay Code 6. Hang up. 7086 7087 7088 7089 7090 7091 Relay (Accessory) SLT User Guide...

  • Page 87: Reminder

    4. Snooze by dialing Snooze feature code 4. 5. Listen for the confirmation tone. 6. Hang up. Note: When you activate the Snooze feature, Reminder will recycle and your telephone will ring again after a time period defined system-wide. Reminder SLT User Guide...
  • Page 88 If you have programmed a number of reminder times, the reminder that is next to call you will be cancelled. Repeat the procedure to cancel the other reminders in the order of the times when they would call you. Reminder SLT User Guide...

  • Page 89: Room Status

    7032 2. Dial Room Status access code. 7033 3. Listen for the dial tone. 7034 4. Dial cancellation code 7035 5. Listen for the confirmation tone. 7036 6. Hang up. 7037 7038 7039 7040 7041 Room Status SLT User Guide...

  • Page 90: Saved Number/Repeat Number

    Account code is required a distinctive dial tone will be heard after dialing #196. 2) As opposed to Last Number Redial, the Saved Number will remain in memory until another number is saved by repeating the above procedure. Saved Number/Repeat Number SLT User Guide...

  • Page 91: Second Party's Speaker Status

    • When you answer a call initiated with an activated loudspeaker • When the called FlexSet party answered you with an activated loudspeaker • During a call, when the second FlexSet party activates the loudspeaker Second Party’s Speaker Status SLT User Guide...

  • Page 92: Security Line

    To cancel Security Line: 1. Lift handset. 2. Dial Security feature code #17700. 3. Listen for the dial tone. 4. Dial cancellation code 5. Listen for the confirmation tone. 6. Hang up. All break-in attempts are allowed. Security Line SLT User Guide...

  • Page 93: Series Call

    3. Listen for the confirmation tone. 4. Continue with the call or transfer as required. 5. Hang up. Transferring the call is made as usual. However, the marked call will now return to you when the third party hangs up. Series Call SLT User Guide...

  • Page 94: Silent Monitor

    • to listen in on a transmission of a selected port (first conversing party) • to listen in on any port (second conversing party) contacting the selected port or being contacted by that selected port Silent Monitor SLT User Guide...

  • Page 95: 1-Way Splitting

    • To monitor the 2nd conversing party, dial activation code Note: When you hear the reorder tone, it means that the port is protected against monitoring. To terminate Split Silent Monitor: 1. Hang up. Silent Monitor: 1-Way Splitting SLT User Guide...
  • Page 96 When you heard the reorder tone, one of the two conditions exists: 1) Either the port is protected against monitoring or 2) All conference card ports are engaged To cancel 2-Way Silent Monitor: 1. Hang up. Silent Monitor: 2-Way SLT User Guide...

  • Page 97: Speed Dialing

    1. Lift handset. 2. Dial Private Speed Dial feature code #193. 3. Listen for the dial tone. 4. Dial the required Private Library number 7000-7009. 5. Dial cancellation code 6. Hang up. Speed Dialing: Programming Private Library SLT User Guide...
  • Page 98 Inhibits display (for Call Accounting System) Enables display (for Call Accounting System) Wait for second Dial Tone Display ‘-’ (for Call accounting System) Calibrated Opening on trunk (Flash) Dial Dial # out Speed Dialing: Programming Private Library SLT User Guide...

  • Page 99: Using Private And Public Libraries

    2) Certain speed dialing numbers require that you dial the relevant outside line access code. When required, the dial tone will be heard after dialing the Speed call library number. Speed Dialing: Using Private and Public Libraries SLT User Guide...

  • Page 100: Stop Dial

    You can send a signal to the system indicating the end of a stream of dialed digits. In response to your command the system sends your call immediately towards the destination without waiting inter-digit time out. When you have finished dialing an outside line: 1. Press #. Stop Dial SLT User Guide...

  • Page 101: Transfer

    To perform unscreened transfer of an established call: 1. Hookflash. 2. Dial the required number. 3. Hang up during ringback or busy tone. To return to the calling party (when transfer destination is busy or does not answer): Hookflash. Transfer SLT User Guide...

  • Page 102: Waiting Calls Receiving

    1. This option is available only if ANSWER CALL WAITING WITH HF parameter is set to No for your station. 2. This option is available only if ANSWER CALL WAITING WITH HF parameter is set to Yes for your station. Waiting Calls Receiving SLT User Guide...

  • Page 103: Wakeup

    3. If you hear music or the distinctive dial tone you can dial Snooze feature code 4. 4. Listen for the confirmation tone. 5. Hang up. Note: When you activate Snooze, Wakeup will recycle and your telephone will ring again after a time period defined system-wide. Wakeup SLT User Guide...
  • Page 104 4. Dial cancellation code 5. Listen for the confirmation tone. 6. Hang up. Note: If you have programmed a number of Wakeup requests, the forthcoming wakeup will be cancelled. Continue the cancellation procedure for other times. Wakeup SLT User Guide...

  • Page 105: Whisper Page

    5. Disconnect when the conversation is concluded. Notes: 1) When you hear reorder tone the station is protected from receiving whisper paging calls. 2) If receiving party rejects your whisper page, you will hear reorder tone. Whisper Page: Activation SLT User Guide...

  • Page 106: Receiving

    2. Listen to the whispered message when the tone stops. To release the second party and talk to the whisperer: 1. Ask the party you are conversing with to disconnect. 2. Talk privately to the whisperer. Whisper Page: Receiving SLT User Guide...

  • Page 107: Turning On/Off

    To enable your telephone to receive whisper calls: 1. Dial DND Whisper feature code #1745. 2. Listen for the dial tone. 3. Dial cancellation code 4. Listen for the confirmation tone. 5. Hang up. Whisper Page, Receiving: Turning On/Off SLT User Guide...

  • Page 108: Appendix A - Glossary

    A feature that forces the station user to dial an account code before accessing an outside line. After dialing the account code, the user will be able to continue dialing the required number. Appendix A - Glossary SLT User Guide...
  • Page 109 A series of digits which must be keyed in order to gain access to a trunk or trunk group. Outside Line Access Code Port Provides access to a device, station or trunk from within the system. Appendix A - Glossary (cont.) SLT User Guide...
  • Page 110 Usually referred to as CO Trunk Number. This is the number dialed by an outside telephone user from the public network (through the Central Office) in order to call an internal station. (Number listed in the local telephone directory.) Appendix A - Glossary (cont.) SLT User Guide...
  • Page 111 Before dialing is allowed, VFAC verifies the presence of the account code in the system. If the code is not found, dialing is blocked; when the code is found, dialing is allowed. Each code can have specific dialing restrictions. Appendix A - Glossary (cont.) SLT User Guide...

  • Page 112: Appendix B - Tones

    When the following features are applied at your telephone, the distinctive dial tone will be heard when the handset is lifted from idle: •Call Forward All •Do Not Disturb •Messages •Secondary COS Appendix B - Tones SLT User Guide...
  • Page 113 Whisper Page Tone A tone heard while engaged in a conversation, indicating that a third party wants to break into the conversation with a whisper. The second conversing party does not hear the tone. Appendix B - Tones (cont.) SLT User Guides...

  • Page 114: Appendix C - Dial Tone Pad - Feature Codes

    Except for “Redial Last Number” all of these features are used with the # button and the appropriate number. For example, in order to operate Call Forward All press # and then 8. Appendix C - Dial Tone Pad - Feature Codes SLT User Guide...
  • Page 115 Tadiran Telecom Business Systems Ltd. International Headquarters Tadiran Telecom Business Systems Ltd. 18 Hasivim St., P.O.Box 450 Petach-Tikva 49105, Israel Tel. +972-3-9262000, Fax. +972-3-9262310 USA Headquarters Tadiran Telecom, Inc. 4 Tri Harbor Court Port Washington, NY 11050 Tel. +1-516-632-7200, Fax. +1-516-632-7210 Visit us at our website http://www.tadirantele.com...

Table of Contents