1. Manuals
  2. Brands
  3. Tadiran Telecom Manuals
  4. Telephone
  5. SLT
  6. User manual

Tadiran Telecom SLT User Manual

Single line telephone
Hide thumbs Also See for SLT:
Table of Contents

Advertisement

Quick Links

.
SLT

Single Line Telephone

User Guide
(Version 15.5)
Creating a new world of IPportunities

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SLT and is the answer not in the manual?

Questions and answers

Related Manuals for Tadiran Telecom SLT

Summary of Contents for Tadiran Telecom SLT

  • Page 1: Single Line Telephone

    Single Line Telephone User Guide (Version 15.5) Creating a new world of IPportunities...
  • Page 2 TADIRAN TELECOM LTD.’s (here in referred to as the “Manufacturer”) rights in the aforesaid information. Neither this document nor the information contained herein may be published, reproduced or disclosed to third parties, in whole or in part, without the express, prior, written permission of the Manufacturer.

  • Page 3: Table Of Contents

    Exclusive Hold ..........23 Group Calls (Conference): ........65 Privacy............. 24 Group Call Features......... 66 Break-In..............25 Preset Conference Activation......67 Broker/Consult./3-Way Conf. Call/Contin. Conf. 26 Temporary Conference Activation ....68 Call Forward............29 Joining ............. 69 TOC-1 SLT User Guide...
  • Page 4 Zone (To Keyset Group) ......... 87 Whisper Page:............. 114 Park............... 88 Activation ............114 Passcode ............... 89 Receiving............115 Phone Dial Lock........... 90 Receiving, Turning On/Off ......116 Pickup: Group, Directed........91 Appendix A - Glossary ........A-1 TOC-2 SLT User Guide...
  • Page 5 Appendix B - Tones .......... B-1 Appendix C - Dial Tone Pad - Feature Codes ... C-1 TOC-3 SLT User Guide...

  • Page 6: Introduction

    Coral supports for standard telephones. Use of this guide is straightforward, with each feature listed separately. Certain features have various user options. In this case all of the options are listed under the major feature name; examples of this are ACD & UCD Groups, Boss Group and Speed Dialing. Introduction SLT User Guide...

  • Page 7: List Of Feature Codes

    Call Park ..........#183 or 79 or #7 Call Forward No Answer External....... #17708 Call Pickup: Call Forward Timed..........#1984 Directed............#180 or 77 Call Forward Timed External ......#17709 Group ............. #181 or 76 Exclusive Hold ............#187 List of Feature Codes SLT User Guide...
  • Page 8 Forced Release of an Entire Group Call ....#1447 FlexiCall All ............#17710 Last Number Redial ........... or #143 FlexiCall Internal ..........#17711 Malicious Call Trace on/off ........#1740 FlexiCall External..........#17712 Malicious Call Trace Printout ........#1741 Placing a new call ............. Message: Call transfer............... List of Feature Codes SLT User Guide...

  • Page 9: Feature Code No

    Phone Dial Lock ............#148 → Relay (Accessory) .......... 7086 7091 Reminder: Request ..............#172 Snooze................4 → Room Status..........#7026 7041 Saved Number/Repeat Number ......#196 or #9 Security Line............#17700 Series Call ..........Hookflash #195 Silent Monitor: List of Feature Codes SLT User Guide...

  • Page 10: Account Code (As Required)

    Note: Depending upon your system definition, up to 16 digits are available for Account Numbers. Only one account number entry is allowed per call. Any additional numbers are refused and the reorder tone is heard. Account Code (as required) SLT User Guide...

  • Page 11: Account Code (Forced)

    2. Dial a Speed Call library number. 3. Dial account number. Note: Should you dial a wrong account number when VFAC is installed in your system, a reorder tone is heard followed by disconnect. Account Code (Forced) SLT User Guide...

  • Page 12: Acd & Ucd Groups

    PRIMARY LOG-IN - FOR ACD GROUP ....... 11 RELEASE/RESUME FROM ALL GROUPS ......12 RELEASE/RESUME FROM A UCD GROUP ....... 13 WRAP-UP CODE - FOR ACD GROUP ......... 14 WRAP-UP TIME ON/OFF ............15 ACD & UCD Groups SLT User Guide...

  • Page 13: Load Id - For Acd Group

    Note: Only one ID number is allowed per station. Any additional Load ID replaces the current one. The ID number can be changed as many times as needed. ACD & UCD Groups SLT User Guide Load ID - for ACD Group...

  • Page 14: Log-In/Out - For A Single Acd Group

    Notes: 1) When logging in or out from additional groups, the above procedures are repeated as many times as needed. 2) In some groups, in order to log in, you must first have defined an ID number (see page ACD & UCD Groups SLT User Guide Log-In/Out - for a Single ACD Group...
  • Page 15 3) If you log-out from your primary group using this feature code, you must also log-out as primary, so the group is no longer marked as your primary (see page 11). ACD & UCD Groups SLT User Guide Log-In/Out - for a Single ACD Group...

  • Page 16: Primary Log-In - For Acd Group

    Note: After logging out so the group is no longer marked as primary, you must remain logged in as a member of the group (see page ACD & UCD Groups SLT User Guide Primary Log-In - for ACD Group...

  • Page 17: Release/Resume From All Groups

    To resume connection with all ACD/UCD groups: 1. Lift handset. 2. Dial feature code #1975. 3. Listen for dial tone. 4. Dial cancellation code . 5. Listen for the confirmation tone. 6. Hang up. ACD & UCD Groups SLT User Guide Release/Resume from All Groups...

  • Page 18: Release/Resume From A Ucd Group

    2. Dial Release/Resume UCD Group feature code #1991. 3. Listen for dial tone. 4. Dial your UCD Group number. 5. Dial cancellation code . 6. Listen for the confirmation tone. 7. Hang up. ACD & UCD Groups SLT User Guide Release/Resume from a UCD Group...

  • Page 19: Wrap-Up Code - For Acd Group

    8. Hang up. Use this table to create a list of Wrap Up Codes and their description (See your supervisor for a list of codes). Wrap-up Code Description ACD & UCD Groups SLT User Guide Wrap-Up Code - for ACD Group...

  • Page 20: Wrap-Up Time On/Off

    To cancel Wrap-Up Time: 1. Lift handset. 2. Dial Wrap-Up Time feature code #1976. 3. Listen for dial tone. 4. Dial cancellation code . 5. Listen for the confirmation tone. 6. Hang up. ACD & UCD Groups SLT User Guide Wrap-Up Time On/Off...

  • Page 21: Activation Code

    #11, # 1, or Use the Activation code as required when programming features. The following symbol in this manual indicates an activation code: See your system manager, as to which activation code is used in your system. Activation Code SLT User Guide...

  • Page 22: Auto Set Relocate

    When defined for permanent relocation, allows you to swap phones 1. Auto Set Relocate activation within the same Coral system by assigning one SLT the profile of the from the Destination station other SLT, and vice versa. All the phone’s properties, numbering, 2.

  • Page 23: Temporary

    The Auto Set Relocate spares you the inconvenience of having to re-enter all the stored speed numbers and to reset previously defined features at your temporary location. This feature allows you to use any SLT available from your Coral system while keeping your unique extension dial number.
  • Page 24 6. Dial your source passcode (four digits). 7. Listen for dial tone. 8. Dial cancellation code (no confirmation tone is heard). 9. Hang up. 10. The destination station reinitializes with its original profile. Auto Set Relocate SLT User Guide Temporary...

  • Page 25: Boss Group

    DVMS pre-recorded message, UNA/central bell, group call, or network number (and the Boss Group itself for external calls). (See page 22 for forwarding procedure). The following Boss Group features are available: FEATURE ................PAGE CALL FORWARD ..............21 EXCLUSIVE HOLD ..............23 PRIVACY ................. 24 Boss Group SLT User Guide...

  • Page 26: Call Forward

    Time Period From Table 1: Boss Group Call Forward Codes Call Forward Feature Codes Type Internal and External Calls External Calls Only #168 #17707 Busy #167 #17706 No Answer #169 #17708 Timed #1984 #17709 Boss Group SLT User Guide Call Forward...
  • Page 27 Note: Should you hear the reorder tone, Call Forward is denied at your station (as defined by Class of Service). In order to use this feature, ask the attendant to activate Call Forward for your boss group. Boss Group SLT User Guide Call Forward...

  • Page 28: Exclusive Hold

    To cancel Exclusive Hold: 1. Lift handset. 2. Dial Exclusive Hold feature code #187. 3. Listen for dial tone. 4. Dial cancellation code . 5. Listen for the confirmation tone. 6. Hang up. Boss Group SLT User Guide Exclusive Hold...

  • Page 29: Privacy

    6. Hang up. To cancel Privacy: 1. Lift handset. 2. Dial Privacy feature code #186. 3. Listen for dial tone. 4. Dial cancellation code . 5. Listen for the confirmation tone. 6. Hang up. Boss Group SLT User Guide Privacy...

  • Page 30: Break-In

    This feature allows an authorized user to break into an established two-party call. To break into a busy conversation: 1. Hookflash. 2. Dial Break-In code 3. Note: Both conversing parties hear the Break-In warning tone. To release Break-In (break-out): 1. Hang up. Break-In SLT User Guide...

  • Page 31: Broker/Consult./3-Way Conf. Call/Contin. Conf

    The first hookflash allows you to converse privately with a third party. The second hookflash allows you to speak privately with the original party, while the third party is put on hold. The third hookflash places you in a three- way conversation with all parties. Broker/Consult./3-Way Conf. Call/Contin. Conf SLT User Guide...
  • Page 32 To add members to a Three-Way Conference Call: 1. Hookflash. 2. Dial the additional party number and wait for an answer. 3. Hookflash - new party added to the multi-party (Continous Conference) call. Broker/Consult./3-Way Conf. Call/Contin. Conf SLT User Guide...
  • Page 33 2. Dial the third party number and wait for an answer. 3. Hookflash - third party put on hold. When you have concluded your private conversation 4. Hookflash to complete a Three-Way Conference Call. Broker/Consult./3-Way Conf. Call/Contin. Conf SLT User Guide...

  • Page 34: Call Forward

    See your system administrator for the time period definitions. For example, between 12:00pm and 12:30pm and between 6:00pm and 6:30pm, calls can be forwarded to the group secretary. Time Period From Call Forward SLT User Guide...
  • Page 35 Table 2: Call Forward Codes Call Forward Internal and External Calls Type External Calls Only #141 or #8 #17702 Busy #140 #17701 No Answer #142 #17703 Busy/No Answer #147 or #2 #17705 Timed #1985 #17704 Undefined #17717 Call Forward SLT User Guide Call Forward...
  • Page 36 Possible destinations for Y are the same as for X, plus your own station number, thus facilitating forwarding of internal calls to another destination, while retaining external calls at your own station, as shown in Case 5. Call Forward SLT User Guide...
  • Page 37 4. Dial the cancellation code . 5. Listen for the confirmation tone. 6. Hang up. Note: If you hear a Reorder Tone, Call Forward is denied at your station (as defined by Class of Service). Call Forward SLT User Guide...

  • Page 38: Caller Id Control

    1. Lift handset. 2. Dial Caller ID Control feature code #1444. 3. To display your Caller ID, dial activation code 4. To hide your Caller ID, dial cancellation code . 5. Make call as required. Caller ID Control SLT User Guide...

  • Page 39: Camp-On

    To cancel Camp-On before you are called back: 1. Lift handset. 2. Dial Camp-On Call back feature code #176. 3. Listen for dial tone. 4. Dial cancellation code . 5. Listen for the confirmation tone. Camp-On SLT User Guide Call Back...

  • Page 40: Camp-On Call Back

    When your telephone rings (destination station now idle): 1. Lift your handset (requested station immediately rings) Should you hear distinctive dial tone, Dial 2 to initiate ringing. Note: The way in which you answer a Camp-on Call Back is defined system-wide. Camp-On SLT User Guide Call Back...

  • Page 41: Off-Hook (Call Waiting/Call Offer)

    To Camp-On a busy station while off-hook: 1. Hookflash. 2. Dial 8. 3. Listen for the ringback tone or second ringback tone (defined system-wide). 4. Wait for answer. Camp-On SLT User Guide Off-Hook (Call Waiting/Call Offer)

  • Page 42: Cancellation Code

    Cancellation Code #10, # 0, or Use the Cancellation code as required when programming features. The following symbol indicates a cancellation code: See your system manager, as to which cancellation code is used in your system. Cancellation Code SLT User Guide...

  • Page 43: Canned Messages

    To activate or set a Canned Message: 1. Lift handset. 2. Dial Canned Message access code. 3. Listen for dial tone. 4. Dial ee. 5. Listen for the confirmation tone. 6. Hang up. Canned Messages SLT User Guide...
  • Page 44 To cancel or reset a Canned Message: 1. Lift handset. 2. Dial Canned Message access code. 3. Listen for dial tone. 4. Dial cancellation code . 5. Listen for the confirmation tone. 6. Hang up. Canned Messages SLT User Guide...
  • Page 45 Canned Messages Table 3: Canned Message - Text and User Access Codes Canned Message Number Access Code Canned Message Text 7026 7027 7028 7029 7030 7031 7032 7033 7034 7035 7036 7037 7038 7039 7040 7041 Canned Messages SLT User Guide...

  • Page 46: Class Of Service (Cos) Switchover

    Notes: 1) To perform COS Switchover at your telephone, you must first have a defined passcode (see page 89). 2) The selection of secondary COS is denied when your telephone is in Check Out mode. Class of Service (COS) Switchover SLT User Guide...

  • Page 47: Conference

    To leave a conference: 1. Hang up. To add a participant to a progressive conference (while connected to station/trunk): 1. Hookflash. 2. Dial assigned conference number 7098-7099. 3. Hang up. A warning tone is heard by all participants. Conference: SLT User Guide Multi-Party...

  • Page 48: Release

    The first to be removed is always the first member who joined the conference, the second to be removed is the second member who joined the conference, and so on. When a member is removed, a warning tone is heard by all remaining participants. Conference: SLT User Guide Release...

  • Page 49: Do Not Disturb (Dnd)

    2) Should you hear the reorder tone, DND is denied at your station (as defined by Class of Service). In order to use this feature, ask the attendant to activate DND at your station. Do Not Disturb (DND) SLT User Guide...

  • Page 50: Do Not Disturb (Dnd) Override

    To override Do Not Disturb status: 1. Hookflash. 2. Dial override code 3. 3. Listen for the ringback tone. 4. Wait for answer. Note: The override feature uses the same feature code as Break-In. Do Not Disturb (DND) Override SLT User Guide...

  • Page 51: Executive Privilege

    2) In order to use Executive Privilege your station must be defined with a passcode (see page 89). 3) Executive Privilege remains in effect for a single call only. Once the call is completed the telephone returns to its original Class of Service. Executive Privilege SLT User Guide...

  • Page 52: Flash (Calibrated Opening) On Trunk

    In cases where this is required, specific instructions are given. Use the following lines to write in the ways in which Flash is used in your company’s telephone system: _______________________________________________________________________________________________ _______________________________________________________________________________________________ _______________________________________________________________________________________________ _______________________________________________________________________________________________ _______________________________________________________________________________________________ _______________________________________________________________________________________________ _______________________________________________________________________________________________ Flash (Calibrated Opening) On Trunk SLT User Guide...

  • Page 53: Flexicall

    • Group call • Boss Group call (only the first member of a Boss Group rings) • ELA Group call (only one member of an ELA Group rings) • Bell/UNA • Reminder, Wakeup • Voice Page FlexiCall SLT User Guide...
  • Page 54 Internal Calls ring at: External Calls ring at: Internal External Case (#17710) (#17711) (#17712) Coral station Remote phone Coral station Remote phone Irrelevant Irrelevant Table 4: FlexiCall Forward Codes FlexiCall Type Feature Codes #17710 Internal #17711 External #17712 FlexiCall SLT User Guide...
  • Page 55 3. Listen for dial tone. 4. Dial cancellation code . 5. Listen for the confirmation tone. 6. Hang up. Notes: Should you hear a reorder tone, FlexiCall is denied at your station (as defined by Class of Service). FlexiCall SLT User Guide...
  • Page 56 1. Answer the FlexiCall call as you would answer a regular call. (See your remote telephone User Guide). 2. Once you have answered a FlexiCall call at your remote destination, you can activate any of the options described in Table 5, “FlexiCall Options from Remote Destination”. FlexiCall SLT User Guide...

  • Page 57: Call Recording / Help Requesting

    If your station does not answer within the system defined time-out period, the call returns to your remote phone. Used to Start/Stop Recording incoming calls (requires a system-wide defined Navigator application). Call Recording / Help Requesting Or send Help request (requires a pre-selected system-wide defined keyset station). FlexiCall SLT User Guide...
  • Page 58 Note: Contact your system administrator for the voice mail (IVR) dial number and voice mail remote access code. Use the table below to record the number and code: Voice Mail (IVR) Voice Mail Remote Dial Number Access Code FlexiCall SLT User Guide...

  • Page 59: Follow Me

    2. Dial the appropriate Follow Me feature code (see Table 6) from the remote location where you wish the calls to be forwarded. 3. Listen for dial tone. 4. Dial your own station number. 5. Dial activation code 6. Listen for the confirmation tone. 7. Hang up. Follow Me SLT User Guide...
  • Page 60 2. Dial Call Forward All (or External) feature code #141 (or #17702) (see Table 2 on page 30). 3. Listen for dial tone. 4. Dial cancellation code . 5. Listen for the confirmation tone. 6. Hang up. Follow Me SLT User Guide...

  • Page 61: Forced Release

    4. Dial Break-In code 3. 5. Listen for conversation, then either 6. Hang up if the parties are in conversation and you decide not to release the parties Hookflash and hang up in order to force release. Forced Release SLT User Guide...

  • Page 62: Freedom (Irss)

    Library Number To cancel Freedom destination: . 1. Lift handset. 2. Dial Freedom feature code #17714. 3. Listen for dial tone. 4. Dial cancellation code . 5. Listen for the confirmation tone. 6. Hang up. Freedom (IRSS) SLT User Guide...
  • Page 63 4) To enable another Freedom phone, skip to page 6. Listen for the ringback tone. 7. Wait for an answer. 8. You can activate any of the options described in the table on page Freedom (IRSS) SLT User Guide...
  • Page 64 • To enable another Freedom phone, skip to page 7. Listen for the ringback tone. 8. Wait for an answer. 9. You can activate any of the options described in the table on page Freedom (IRSS) SLT User Guide...
  • Page 65 For instructions on accessing voice mail from an Freedom phone, see page mail/IVR Used to Start/Stop Recording outgoming calls (requires a system-wide defined Navigator application). Call Recording / Help Requesting Or send Help request (requires a pre-selected system-wide defined keyset station). Freedom (IRSS) SLT User Guide...
  • Page 66 2 for a 3-way call. To activate a combination of Consultation/Broker/3-way Conference calls: 1. Dial 2. Dial the third party number and wait for an answer. 3. Dial 2. The third party is put on Freedom (IRSS) SLT User Guide...
  • Page 67 Notes: 1) Contact your system administrator for the voice mail (IVR) dial number and voice mail remote access code. 2) Use the table below to record that number and code: Voice Mail (IVR) Voice Mail Remote Dial Number Access Code Freedom (IRSS) SLT User Guide...
  • Page 68 Public/Private Speed Call Library 5. Listen for the confirmation tone. To cancel the FlexiCall All feature from your Freedom phone: 1. Repeat steps 1-3 above. 2. Dial cancellation code . 3. Listen for the confirmation tone. Freedom (IRSS) SLT User Guide...
  • Page 69 Freedom phone. To cancel the Freedom feature from an Freedom phone: 1. Repeat steps 1-4 above. 2. Dial cancellation code . 3. Listen for a short burst of confirmation tone. Freedom is cancelled at your station. Freedom (IRSS) SLT User Guide...

  • Page 70: Group Calls (Conference)

    In case of a muted conference, only the Group Call initiator has the right to speak. Other participants can be granted permission to speak by The Group Operator. These options are set in the Group Call definitions. An authorized user can force release a participant or terminate an entire conference. Group Calls (Conference) SLT User Guide...

  • Page 71: Group Call Features

    ....... 68 JOINING .................. 69 ADDITION OF PARTICIPANTS ..........70 SUBMITTING REQUEST TO SPEAK ........71 FORCED RELEASE OF A PARTICIPANT ......72 FORCED RELEASE OF AN ENTIRE GROUP CALL ..73 Group Calls (Conference) SLT User Guide Group Call Features...

  • Page 72: Preset Conference Activation

    4. Wait for members to join, hear a warning tone (if defined system-wide) every time a member answers. 5. Start speaking. Use the following form to write in your group numbers and destination. Zone/Area/Members Access Code Group Calls (Conference) SLT User Guide Preset Conference Activation...

  • Page 73: Temporary Conference Activation

    9. Wait for members to join, hear a warning tone (if defined system-wide) every time a member answers. 10. Start speaking. Note: For Group Call access code, see table on page Group Calls (Conference) SLT User Guide Temporary Conference Activation...

  • Page 74: Joining

    Note: When the group is defined as blocked against joining an ongoing conference, a busy tone is heard. To leave a conference: 1. Hang up. A warning tone is heard by all participants (if defined system-wide). Group Calls (Conference) SLT User Guide Joining...

  • Page 75: Addition Of Participants

    If neither are registered members, both conversing parties are disconnected. 2) When the group is defined such that no new participant can join an ongoing conference, both conversing parties are disconnected. The busy tone is heard. Group Calls (Conference) SLT User Guide Addition of Participants...

  • Page 76: Submitting Request To Speak

    To send a request to speak to the Group Operator: 1. Hookflash. 2. Continue attending the current conference. 3. Wait for the Group Operator to ask you to speak. Group Calls (Conference) SLT User Guide Submitting Request to Speak...

  • Page 77: Forced Release Of A Participant

    1. Lift handset. 2. Dial the feature code #1446. 3. Listen for dial tone. 4. Dial participant number. 5. Dial activation code . (No confirmation tone is sounded.) 6. Hang up. Group Calls (Conference) SLT User Guide Forced Release of a Participant...

  • Page 78: Forced Release Of An Entire Group Call

    3. Listen for dial tone. 4. Dial the access code of the required Group Call. 5. Dial activation code 6. No confirmation tone is heard. 7. Hang up. Group Calls (Conference) SLT User Guide Forced Release of an Entire Group Call...

  • Page 79: Hold

    2) If you do not return to the call within a predetermined period, the call automatically rings back at your station. 3) If your telephone is programmed with Hard Hold, when hold is activated on a call, your station is considered busy for additional incoming calls. Outgoing calls, however, can still be made. Hold SLT User Guide...

  • Page 80: Hot Line (Immediate/Delayed)

    Note: When dial tone is heard, you can dial the other number to override the feature. 3. Wait for a certain period of time until the hot line destination rings. 4. Wait for answer. Hot Line (Immediate/Delayed) SLT User Guide...

  • Page 81: Last Number Redial

    Note: When dialing over an outgoing trunk, in some cases the Last Number Redial feature code must be followed by a Forced Account code When Forced Account code is required the distinctive dial tone is heard after dialing #143 or pressing Last Number Redial SLT User Guide...

  • Page 82: Making Calls

    6) Some systems might be programmed with a limit on duration of outgoing external calls. Once the pre-defined limit is reached, the call is automatically disconnected. To make internal calls: 1. Lift handset. 2. Dial station number. 3. Listen for the ringback tone. 4. Wait for answer. Making Calls SLT User Guide...

  • Page 83: Malicious Call Trace

    Class of Service). To cancel malicious call trace: 1. Lift handset. 2. Dial feature code #1740. 3. Listen for dial tone. 4. Dial the cancellation code . 5. Listen for the confirmation tone. 6. Hang up. Malicious Call Trace SLT User Guide...

  • Page 84: Malicious Call Trace Printout

    2) The details recorded include the Originating number (for external calls: ANI if available, else trunk number), your station number and the time of the calls. 3) The listing is not deleted when printed out. It can be reprinted later, including subsequent updates. Malicious Call Trace Printout SLT User Guide...

  • Page 85: Message

    5. Listen for the ringback tone. 6. Wait for answer. Note: If your telephone is not provided with a message waiting lamp, the message feature code #175 must be followed by dialing an activation code Message SLT User Guide Answering...

  • Page 86: Leaving/Cancellation

    Note: When you try to leave a message at a station, and receive a reorder tone, the station is probably not equipped with a message waiting lamp, or not configured to accept messages. To cancel a message that you left: 1. Lift handset. 2. Dial Message Cancellation feature code #1440. Message SLT User Guide Leaving/Cancellation...
  • Page 87 Message Leaving/Cancellation 3. Dial station or network number. 4. Listen for the confirmation tone. 5. Hang up. Message SLT User Guide Leaving/Cancellation...

  • Page 88: Night Answer (Central Bell/Una Pickup)

    2. Dial Directed Call Pickup feature code #180. 3. Listen for dial tone. 4. Dial the number of the ringing bell. 5. Answer the call. Note: UNA (Universal Night Answering) Pickup is also known as Bell Pickup. Night Answer (Central Bell/UNA Pickup) SLT User Guide...

  • Page 89: Page Queue

    Voice Page (see Paging on page 85) to announce the call for pick up. Make sure to include both the name of the person being notified and the relevant Page_Q number. Note: If the call is not picked up within a predetermined time, it automatically returns to the originating station from which Page_Q was placed. Page Queue SLT User Guide...

  • Page 90: Paging

    To voice page: 1. Lift handset. 2. Dial Public Address Paging access code. 3. Announce your message. 4. Hang up. Table 7: Voice Paging - Access Codes Location/Area Access Code 7074 7075 7076 7077 7078 7079 Paging SLT User Guide Public Address...

  • Page 91: Voice (To Single Keyset)

    To voice page a single Keyset that is either busy or does not answer: 1. Hookflash during the call. 2. Dial Voice Page code 6. 3. Listen for the Voice Page tone. 4. Begin paging when tone stops. 5. Hang up. Paging SLT User Guide Voice (To Single Keyset)

  • Page 92: Zone (To Keyset Group)

    3. Listen for the Voice Page tone. 4. Begin paging when tone stops. 5. Hang up. Location/Area Location/Area ACCESS ACCESS CODE C ODE 7300 7305 7301 7306 7302 7307 7303 7308 7304 7309 Paging SLT User Guide Zone (To Keyset Group)

  • Page 93: Park

    Page_Q feature be used instead (see page 84). 2) If the parked call is not picked up within a predetermined time, the call automatically returns to the originating station from which the park was made. Park SLT User Guide...

  • Page 94: Passcode

    2. Dial Passcode feature code #179. 3. Listen for dial tone. 4. Dial your present passcode (four digits). 5. Dial your new passcode (four digits). 6. Redial your new passcode. 7. Listen for the confirmation tone. 8. Hang up. Passcode SLT User Guide...

  • Page 95: Phone Dial Lock

    4. Dial your passcode (four digits). 5. Dial cancellation code 6. Listen for the confirmation tone. 7. Hang up. Note: You must first define a passcode (see page 89) in order to dial lock your telephone. Phone Dial Lock SLT User Guide...

  • Page 96: Pickup: Group, Directed

    To answer any call within the system: 1. Lift handset. 2. Dial Directed Call Pickup feature code #180. 3. Listen for dial tone. 4. Dial the number of the ringing phone. 5. Answer the call. Pickup: Group, Directed SLT User Guide...

  • Page 97: Receiving Calls / Answering Calls

    Some display models provide a call log option that allows you to view a record of incoming and outgoing (or solely incoming) calls that were handled by your phone. The calls are sorted by date and time. For more information refer to the Caller ID display unit Operation Guide. Receiving Calls / Answering Calls SLT User Guide...

  • Page 98: Relay (Accessory)

    External Device Relay Code 1. Lift handset. 7086 2. Dial Relay code. 7087 3. Listen for dial tone. 7088 4. Dial cancellation code . 7089 5. Listen for the confirmation tone. 7090 6. Hang up. 7091 Relay (Accessory) SLT User Guide...

  • Page 99: Reminder

    3. You can dial Snooze feature code 4 and listen for the confirmation tone. 4. Hang up. Snooze Note: When you activate the feature, Reminder recycles and your telephone rings again after a system-wide defined time period. Reminder SLT User Guide...
  • Page 100 Note: Reminder times must be cancelled one at a time. If you have more than one reminder time programmed, then the closest reminder time to the present hour is cancelled. You must repeat this procedure to cancel each subsequent reminder time. Reminder SLT User Guide...

  • Page 101: Room Status

    To cancel or reset the Room Status: 1. Lift handset. 2. Dial Room Status access code. 3. Listen for dial tone. 4. Dial cancellation code . 5. Listen for the confirmation tone. 6. Hang up. Room Status SLT User Guide...
  • Page 102 Room Status Room Status Numbers and Access Codes Room Status # Access Code Name 7026 7027 7028 7029 7030 7031 7032 7033 7034 7035 7036 7037 7038 7039 7040 7041 Room Status SLT User Guide...

  • Page 103: Saved Number/Repeat Number

    Account code is required a distinctive dial tone is heard after dialing #196. 2) As opposed to Last Number Redial, the Saved Number remains in memory until another number is saved by repeating the above procedure. Saved Number/Repeat Number SLT User Guide...

  • Page 104: Second Party's Speaker Status

    When you answer a call initiated with an activated loudspeaker • When the called keyset party answered you with an activated loudspeaker • During a call, when the second keyset party activates the loudspeaker Second Party’s Speaker Status SLT User Guide...

  • Page 105: Security Line

    To cancel Security Line: 1. Lift handset. 2. Dial Security feature code #17700. 3. Listen for dial tone. 4. Dial cancellation code . 5. Listen for the confirmation tone. 6. Hang up. All break-in attempts are allowed. Security Line SLT User Guide...

  • Page 106: Series Call

    3. Listen for the confirmation tone. 4. Continue with the call or transfer as required. 5. Hang up. Transferring the call is made as usual. However, the marked call now returns to you when the third party hangs up. Series Call SLT User Guide...

  • Page 107: Silent Monitor

    • to listen in on a transmission of a selected port (first conversing party) • to listen in on any port (second conversing party) contacting the selected port or being contacted by that selected port Silent Monitor SLT User Guide...

  • Page 108: 1-Way (Splitting)

    • To monitor the 2nd conversing party, dial activation code Note: When you hear the reorder tone, it means that the port is protected against monitoring. To terminate Split Silent Monitor: 1. Hang up. Silent Monitor SLT User Guide 1-Way (Splitting)

  • Page 109: 2-Way (Both)

    Note: When you heard the reorder tone, one of the two conditions exists: • Either the port is protected against monitoring or • All conference card ports are engaged To cancel 2-Way Silent Monitor: 1. Hang up. Silent Monitor SLT User Guide 2-Way (Both)

  • Page 110: Speed Dialing

    Use the table below to list your Coral Speed Dial numbers (default Private Library numbers are 7000 to 7009, these may differ in your system, see your system administrator for your system’s Private Library numbers). Private Library Private Library Contents (Destination) Number 7000 7001 7002 7003 7004 7005 7006 7007 7008 7009 Speed Dialing SLT User Guide Programming Private Libraries...
  • Page 111 2. Dial Private Speed Dial feature code #193. 3. Listen for dial tone. 4. Dial the required Private Library number 7000-7009. 5. Dial cancellation code . 6. No confirmation tone is heard. Speed Dialing SLT User Guide Programming Private Libraries...
  • Page 112 Inhibits display (for Call Accounting System) Enables display (for Call Accounting System) Wait for second Dial Tone Display ‘-’ (for Call accounting System) Calibrated Opening on trunk (Flash) Dial Dial # out Speed Dialing SLT User Guide Programming Private Libraries...

  • Page 113: Using Private And Public Libraries

    2) Certain speed dialing numbers require that you dial the relevant outside line access code. When required, the dial tone is heard after dialing the Speed call library number. Speed Dialing SLT User Guide Using Private and Public Libraries...

  • Page 114: Stop Dial

    In response to your command the system sends your call immediately towards the destination without waiting for the inter-digit time out period to expire. When you have finished dialing an outside line: 1. Press #. Stop Dial SLT User Guide...

  • Page 115: Transfer

    To perform unscreened transfer of an established call: 1. Hookflash 2. Dial the Transfer destination number. 3. Hang up during ringback or busy tone. To return to the calling party (when transfer destination is busy or does not answer): 1. Hookflash. Transfer SLT User Guide...

  • Page 116: Waiting Calls - Receiving

    1. This option is available only if ANSWER CALL WAITING WITH HF parameter is set to No for your station. 2. This option is available only if ANSWER CALL WAITING WITH HF parameter is set to Yes for your station. Waiting Calls — Receiving SLT User Guide...

  • Page 117: Wakeup

    If you hear music or the distinctive dial tone you can dial Snooze feature code 4 and listen for the confirmation tone. 3. Hang up. Note: When you activate Snooze, Wakeup recycles and your telephone rings again after a system-wide defined time period. Wakeup SLT User Guide...
  • Page 118 Note: Wakeup request times must be cancelled one at a time. If you have more than one wakeup request time programmed, then the closest wakeup time to the present hour is cancelled. You must repeat this procedure to cancel each subsequent wakeup time. Wakeup SLT User Guide...

  • Page 119: Whisper Page

    2) If the receiving party rejects your whisper page, you hear a reorder tone. 3) Whisper Page cannot be sent to FlexAir handsets (T-402, T-404, T-408, T-304) and IP stations (T207M, T208M, T207S, T208S and FlexSet-IP 280S). Whisper Page SLT User Guide Activation...

  • Page 120: Receiving

    2. Listen to the whispered message when the tone stops. To release the second party and talk to the whisperer: 1. Ask the party you are conversing with to disconnect. 2. Talk privately to the whisperer. Whisper Page SLT User Guide Receiving...

  • Page 121: Receiving, Turning On/Off

    To enable your telephone to receive whisper calls: 1. Dial DND Whisper feature code #1745. 2. Listen for dial tone. 3. Dial cancellation code . 4. Listen for the confirmation tone. 5. Hang up. Whisper Page SLT User Guide Receiving, Turning On/Off...

  • Page 122: Appendix A - Glossary

    DVMS is the utility that provides the means for embedding prerecorded Digitized Voice Message System announcements into the system. Recorded messages can be informative, for example: (DVMS) transfer messages, or advertisements. Enter In this Guide, “Enter” means entering a password or other alphanumeric characters. SLT User Guide...
  • Page 123 A series of digits which must be keyed in order to gain access to a trunk or trunk group. Outside Line Access Code Port Provides access to a device, station or trunk from within the system. Appendix A - Glossary (cont.) SLT User Guide...
  • Page 124 Usually referred to as CO Trunk Number. This is the number dialed by an outside telephone user from the public network (through the Central Office) in order to call an internal station. (Number listed in the local telephone directory.) Appendix A - Glossary (cont.) SLT User Guide...
  • Page 125 Before dialing is allowed, VFAC verifies the presence of the account code in the system. If the code is not found, dialing is blocked; when the code is found, dialing is allowed. Each code can have specific dialing restrictions. Appendix A - Glossary (cont.) SLT User Guide...
  • Page 126 • Call Forward All • Do Not Disturb • Messages • Secondary COS Inside Dial Tone After off-hooking (lifting your handset from idle) or pressing speakerphone (SPKR) key. Appendix B - Tones SLT User Guide...
  • Page 127 Whisper Page Tone A tone heard while engaged in a conversation, indicating that a third party wants to break into the conversation with a whisper. The second conversing party does not hear the tone. Appendix B - Tones SLT User Guide...
  • Page 128 Except for “Redial Last Number” all of these features are used with the # button and the appropriate number. For example, in order to operate Call Forward All press # and then 8. Appendix C - Dial Tone Pad - Feature Codes SLT User Guide...
  • Page 129 International Headquarters Tadiran Telecom Ltd. 18 Hasivim Street P.O.Box 7607 Petach Tikva 49170 Israel Tel. +972-3-9262000, Fax. +972-3-9262310 USA Headquarters Tadiran Telecom, Inc. 4 Tri Harbor Court Port Washington, NY 11050 Tel. +1-516-632-7200, Fax. +1-516-632-7210 Visit us at our website http://www.tadirantele.com Email: coral@tadirantele.com...

Table of Contents