Tadiran Telecom SLT User Manual page 113

Inside Dial Tone
Outside Dial Tone
Reorder Tone
Ringback Tone
Second
Ringback Tone
Ringing:
Internal/External
Speaker Tone
Stutter
Tick Tone
Voice Paging Tone
Whisper Page Tone
Appendix B - Tones (cont.)
Appendix B - Tones (cont.)
After off-hooking (lifting your handset from idle) or pressing speakerphone (SPKR) key.
When connected to an external (trunk) line.
A tone you will receive if you have tried to access a denied feature, or you have misdialed,
etc., or:
• You have stayed off-hook too long before dialing. On-hook and start again, or:
• The station you have called has not answered in time. On-hook and call later, or:
• The handset is not correctly on-hooked. Replace handset on the cradle, or:
• The station you have called is in Do Not Disturb status.
A tone heard when the destination you have dialed is ringing.
Indicates that the destination you have dialed is busy, and your call is waiting to be
answered.
External and internal ring (also for network calls) characteristics are system-wide defined.
Internal ring differs from external incoming ring in duration and cadence, thereby giving an
indication as to the calling source.
Indicates that the second conversing party's keyset is in speakerphone mode.
A tone heard when the handset is lifted indicating that there is a message waiting for you.
A tone indicating that you may continue dialing.
A warbling tone when using the paging facility.
A tone heard while engaged in a conversation, indicating that a third party wants to break
into the conversation with a whisper. The second conversing party does not hear the tone.
B-2 SLT User Guides