Speed Dialing; Programming Private Library - Tadiran Telecom SLT User Manual

Speed Dialing: Programming Private Library
You may be allowed to program your telephone with your own private (personal) Speed Dial directory. This directory
of speed dial numbers can be accessed only at your station.
To program or change a Speed Dial number:
1. Lift handset.
2. Dial Private Speed Dial feature code #193.
3. Listen for the dial tone.
4. Dial the required Private Library Number 7000-7009.
5. Dial the outside line access code.
6. Dial the outside telephone number (Use special DTMF dial codes. See table on
7. Hang up.
Notes:
1) Possible outside line access codes are: trunk number, trunk group number, dial service, routing access or
another public/private library number.
2) The number of digits that can be programmed for an outside telephone number, including dial codes, is limited
by the system (defined system-wide). Should you try entering a longer digit string than allowed, you will hear
reorder tone and programming will stop.
3) A new number programmed into a utilized private library number will replace the old number.
To delete a single number from memory:
1. Lift handset.
2. Dial Private Speed Dial feature code #193.
3. Listen for the dial tone.
4. Dial the required Private Library number 7000-7009.
5. Dial cancellation code
6. Hang up.
Speed Dialing: Programming Private Library
.
page
89
90).
SLT User Guide
#193