Waiting Calls Receiving - Tadiran Telecom SLT User Manual

Waiting Calls Receiving

The presence of the waiting call tone indicates that an additional call is waiting for you to answer.
When you hear this tone you have the following choices:
• Continue current call and ignore the waiting call
or
• Terminate the current call, wait for a ring and then answer the waiting call
or
1
• Put the current call on hold (see
or
2
•
Hookflash and answer the waiting call (third party). Any further hookflash will establish one of the following four call
types described in
To activate a Broker Call:
1. Hookflash to alternate between parties (any number of times).
2. When you hang up, the other parties will remain in conversation.
To activate a Consultation Call:
When your conversation is concluded, hookflash to return to the original call (the consulted third party will be
released).
To activate a Three-Way Conference Call:
Hookflash for Three-Way Call.
To activate combination of Consultation/Broker/Three-Way Conference Call:
1. Hookflash - third party put on hold.
2. When you have concluded your private conversation,hookflash to complete a Three-Way Conference Call.
1. This option is available only if ANSWER CALL WAITING WITH HF parameter is set to No for your station.
2. This option is available only if ANSWER CALL WAITING WITH HF parameter is set to Yes for your station.
Waiting Calls Receiving
"Hold" on page
"Broker/Consultation/Three-Way Conference Call" on page
52), hang up, wait for a ring, and answer the waiting call
94
19.
SLT User Guide