Park - Tadiran Telecom SLT User Manual

Park

Allows you to put a call on hold at one station, and pick it up at another station. The party put on park can hear one of
the following: music, reorder tone, busy tone or no sound at all as defined system-wide.
To park a call:
1. Hookflash.
2. Dial Park feature code #183.
3. Listen for the confirmation tone.
4. Hang up.
To pick-up a parked call from another station:
1. Lift handset from any station.
2. Dial Park feature code #183.
3. Dial station number at which call was parked.
4. Answer the call.
Notes:
1) More than one call can be parked at a single station. Calls are retrieved on a first-in, first-out basis (FIFO).
That is, the first parked call (first in) will be the first call that is picked up (first out). However, if multiparking
is required it is recommended that the Page_Q feature be used instead (see
2) If the parked call is not picked up within a predetermined time, the call will automatically return to the
originating station from which the park was made.

Park

73
#183 or 79 or #7
page 69).
SLT User Guide