Waiting Calls - Receiving - Tadiran Telecom SLT User Manual

Waiting Calls — Receiving
A waiting call tone heard during a conversation indicates that an additional call is waiting for you to answer.
When you hear this tone you can do one of the following:
• Continue with your current call and ignore the waiting call
• Terminate the current call, wait for a ring and then answer the waiting call
1
• Put the current call on hold (see Hold on page 74), hang up, wait for a ring, and answer the waiting call
Note: Some phones might not be configured for Waiting Calls and the calling party hears a Busy tone.
2
• Hookflash and answer the waiting call (third party). Any further hookflashing establishes one of the following four
call types described in Broker/Consultation/3-Way Conference call on page 61.
To activate a Broker Call:
1. Hookflash to alternate between parties (any number of times).
2. When you hang up, the other parties remain in conversation.
To activate a Consultation Call:
When your conversation is concluded, hookflash to return to the original call (the consulted third party is released).
To activate a Three-Way Conference Call:
Hookflash for Three-Way Call.
To activate combination of Consultation/Broker/Three-Way Conference Call:
1. Hookflash - third party put on hold.
2. When you have concluded your private conversation, hookflash to complete a Three-Way Conference Call.
1. This option is available only if ANSWER CALL WAITING WITH HF parameter is set to No for your station.
2. This option is available only if ANSWER CALL WAITING WITH HF parameter is set to Yes for your station.
Waiting Calls — Receiving 111 SLT User Guide