Battery - HP mt44 Maintenance And Service Manual

Battery

Description
Battery, 3 cell, 50 WHr, 4.33 Ah
Before removing the battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
To remove the battery:
CAUTION:
To prevent loss of information, save your work and shut down the computer through Windows before
removing the battery.
1. Disconnect the battery cable from the system board (1).
2. Remove the five Torx T8 2.0×4.0 screws (2).
46 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Removing a battery that is the sole power source for the computer can cause loss of information.
33).
Spare part number
933321-855