Battery Replacement - HP Cloudline CL5200 Gen9 User And Maintenance Manual

Battery replacement

If the server no longer automatically displays the correct date and time, you might need to replace the
battery that provides power to the real-time clock.
WARNING: The computer contains an internal lithium manganese dioxide, a vanadium pent
oxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not
properly handled. To reduce the risk of personal injury:
 Do not attempt to recharge the battery.
 Do not expose the battery to temperatures higher than 60°C (140°F).
 Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
 Replace only with the spare designated for this product.
To remove the component:
Power down the server.
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
o
Extend the server from the rack.
o Remove the server from the rack.
o Remove the access panel.
If installed, remove the SATA cables.
4.
Locate the battery.
5.
Remove the battery.
6.
To replace the component, reverse the removal procedure.
For more information about battery replacement or proper disposal, contact an authorized reseller or an
authorized service provider.
Battery replacement 127