Specifying Ip Address Fax Settings; Ip Address; Host Name; Port - Konica Minolta bizhub C200 Operation Manual

User Settings / User Management / One-Touch/Box Reg.
9.4.7

Specifying IP address fax settings

The procedure for specifying IP address fax settings is described below.
!
Detail
If settings have been specified for "SMTP Authentication User Name" and "SMTP Authentication
Password" on the machine receiving the IP address fax, specify the SMTP authentication user name
and SMTP authentication password on the machine sending the fax.
If SMTP authentication has been enabled with the software switch settings, [SMTP Authentication]
appears. Touch this button to specify the SMTP authentication user name and SMTP authentication
password.
For details on specifying the software switch settings, refer to the User manual – Network Administrator.

IP Address

Use the keypad to type in the IP address of the recipient's machine.

Host Name

Type in the host address of the recipient's machine as the host name. To type in the host name, the DNS
settings (specified from the Network Settings screen in Administrator Management mode) must be specified
first.
!
Detail
For details on specifying the DNS settings, refer to the User manual – Network Administrator.
With software switch settings, the machine can be set to display the screen for entering either the IP
address or the host name. For details, refer to the User manual – Network Administrator.

Port

Type in the port number. (Range: 1 to 65535)
bizhub C200
9
9-21