Specifying Transmission Source Information For Direct Faxing And Ip Address Faxing (Mode 351) - Konica Minolta bizhub 350 User Manual

7
Specifying transmission source information for direct faxing and IP
address faxing (mode 351)
Specify the transmission source information for directly faxing or forwarding
received IP address fax documents.
Settings at time of purchase
Bits
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected.
Bit
7, 6, 5, 4,
3, 2
1
0
7-16
7 6 5 4 3 2 1 0
0 0 0 1 1 0 0 0 (HEX: 10)
Description Setting
-------------------------- 000110
Specifies whether the 0
IP address or the de-
vice name of the trans-
1
mission source is
added to the Subject
line when a received IP
address fax document
is forwarded.
-------------------------- 0
Specifying management settings
Description
*Do not change these bits.
Priority given to device
name
Priority given to IP address
*Do not change this bit.
Page Refer-
ence
----------
----------
----------
----------
200/250/350