When The Message; Memory Becomes Full While Scanning; Display In Enlarge Display Mode - Konica Minolta bizhub 750 User Manual

5
5.4 When the Message "... Not enough remaining memo-
ry." Appears
This machine uses the memory to produce copies.
Since the amount of memory available is limited, the message "Scanning
cannot be continued. Not enough remaining memory." or "The job has been
deleted. Not enough remaining memory." appears if the memory becomes
full while copying.
Continue the operation according to the corresponding instructions.

Memory Becomes Full While Scanning

This message appears when the memory becomes full and scanning stops
while scanning in Copy mode.
To print all pages that have been scanned, touch [Print].
To delete the job for the scanned pages, touch [Delete].

Display in Enlarge Display Mode

5-10
Troubleshooting
bizhub 750/600