5
5.4
When the message "... Not enough remaining memo-
ry." appears
This machine uses the memory to produce copies.
When the amount of memory available is limited while copy operations are
being performed, the message "Not enough memory to continue the job." or
"The job has been deleted. Not enough remaining memory." appears.
Continue the operation according to the corresponding instructions.
Memory becomes full while scanning
This message appears when the memory becomes full and scanning stops
while scanning in Copy mode.
To print all pages that have been scanned, touch [Print].
To delete the job for the scanned pages, touch [Delete].
Display in Enlarge Display mode
5-50
Troubleshooting
C250