Ubee Interactive
6.7
Using the Pass Through Option
Use the Pass Through option to configure a pass through table. Devices in the pass
through table are treated as bridge devices, storing and forwarding data between LAN
interconnections.
Steps
To configure a pass through table:
1. Click Advanced from the main menu.
2. Click Pass Through from the left side menu. The pass through fields are explained
following this screen example.
Pass Through MAC Addresses
Add MAC Address
Addresses entered: n/32
Remove MAC Address
Clear All
6.8
Using the DMZ Host Option
Use the DMZ (Demilitarized Zone) Host option to expose a host IP address to the WAN
(public Internet). You can use this option when applications do not work with port triggers
or other networking strategies.
Ubee DDW365 Advanced Wireless Gateway Subscriber User Guide • February 2014
Label
Defines the input host's MAC address.
Adds the input host's MAC address.
Displays the MAC addresses to be blocked. The number of
MAC addresses is shown as 0/32 where 0 is the number of
addresses in the list. You can add up to 32 MAC addresses at
one time.
Removes the input host's MAC address.
Removes all of the input host's MAC addresses.
Using the Pass Through Option
Description
53