Ubee Interactive
TR-069 capable
Physical and Environmental
Dimensions: 220mm, 8.625" (W) x 220mm, 8.625" (H) x 42mm, 1.625" (D)
Weight: 825g (1.8 lbs.) (Contains internal PSU)
Input: 90-120VAC, 50-60Hz
Output: 12V 2.17A
Operating Temperature: 0°C ~ 40°C (32°F ~ 104°F)
Humidity: 5~90% (non-condensing)
1.7
Understanding Default Values and Logins
The DDW365 is pre-configured with the default parameters for Cox Communications.
Some regions may change default values.
Local Port Address: 192.168.100.1
Web Interface: http://192.168.100.1
Operation Mode: NAT Mode
Subnet Mask: 255.255.255.0
Wireless Defaults:
Primary SSID (subscriber-managed) = "DDW365" plus a period, plus the last 6
characters of the Wi-Fi MAC address plus "-2.4G."
Example for modem with WiFi MAC address 08:3e:8e:44:28:13
If the subscriber changes the SSID, the device does not revert to this default
SSID when the device is reset, except when a factory reset is performed
through the Web UI.
The Wi-Fi MAC address can be found at the top of the Wireless Primary
Network screen. Refer to
Encryption Method = WPA2-PSK with TKIP+AES encryption
WPA Pre-shared Key = Unique key for each device. Also called the network key.
The WPA pre-shared key for the DDW365 is the 13 characters of the modem's
serial number and can be found on the Wireless Primary Network screen. Refer to
Using the Primary Network Option on page
found on the device label. Refer to
Example: B7Y3R11000049
WPS PIN = The WPS PIN is a randomly-generated number found on the Wireless
Primary Network screen. Refer to
The WPS PIN can also be found on the device label. Refer to
Device Label on page
Device Name: UbeeAP
Ubee DDW365 Advanced Wireless Gateway Subscriber User Guide • February 2014
SSID: DDW365.442813-2.4G
Using the Primary Network Option on page
10.
Understanding Default Values and Logins
77. The serial number can also be
Understanding the Device Label on page
Using the Primary Network Option on page
69.
10.
77.
Understanding the
9