Ubee DDW365 User Manual page 27

Ubee Interactive
Startup Procedure (Procedure, Status, Comment)
Acquire Downstream Channel
Connectivity State
Boot State
Configuration File
Security
Downstream Bonded Channels
Channel
Lock Status
Modulation
Channel ID
Frequency
Power
SNR
Correctables
Uncorrectables
Upstream Bonded Channels
Channel
Lock Status
US Channel Type
Channel ID
Symbol Rate
Frequency
Power
Ubee DDW365 Advanced Wireless Gateway Subscriber User Guide • February 2014
Label
Displays the Downstream channel status and if the device has
locked to a channel.
Displays connection status and if the DDW365 is operational.
Displays the status on boot up and if the device is operational.
Provides the status and file name of the configuration file
currently used by the DDW365.
Displays the status of the security settings: enabled/disabled.
Numbers the downstream channels.
Displays if the device has locked successfully to a
downstream channel.
Displays the modulation method required for the downstream
channel to lock on to by the device. This method is
determined by the service provider.
Displays the downstream channel ID.
Displays the downstream channel frequency on which the
device is locked.
Displays the receiver power level in decibel millivolts (dBmV)
after ranging process.
Displays the signal-to-noise ratio (SNR) in decibels (dB), the
desired signal level to the background noise level.
Displays the quantity of codewords which are correctable.
Displays the quantity of codewords which are not correctable.
Numbers the upstream channels.
Displays if the DDW365 succeeded in locking to an upstream
channel.
Displays the channel type.
Displays the current upstream channel ID.
Displays the symbol rate in 1000 symbols per second.
Displays the current cable modem upstream frequency in
hertz.
Displays the current cable modem upstream transmit power in
decibel millivolts (dBmV).
Using the Connection Option
Description
23