Ubee DDW365 User Manual page 48

Ubee Interactive
For example:
To prevent all Telnet access into and across your LAN:
1. Enter the Start and End ports to be 23.
2. Select Both for Protocol to include TCP and UDP.
3. Check Enabled.
4. Click Apply. Field descriptions are listed below the screen example.
Caution
Use caution when assigning port filtering by port range. You may accidentally prevent
traffic that should pass through your network, such as http or email. Pre-assigned
application ports are displayed on the Forwarding screen. Refer to
Option on page
Start Port
End Port
Protocol
Enabled
Apply
Ubee DDW365 Advanced Wireless Gateway Subscriber User Guide • February 2014
45.
Label Description
Defines the starting port number
Defines the ending port number.
Selects the protocol type. Options are UDP, TCP, or Both.
Activates the rule and filters out all traffic on the specified
ports.
Saves changes.
Using the Port Filtering Option
Using the Forwarding
44