Ubee DDW365 User Manual page 88

Ubee Interactive
1. Click the Wireless networking icon in the
2. Click "Open Network and Sharing Center,"
3. Review the speed and signal strength in
9.7.3 Understanding the 2.4GHz Band
The DDW365 operates in the 2.4GHZ frequency band. The table below provides a
information about the 2.4GHz band.
Channels
Standards
Ubee DDW365 Advanced Wireless Gateway Subscriber User Guide • February 2014
Checking Wireless Signal Strength and Speed
Windows PC
system tray to display a list of available
wireless networks.
then click "Wireless Network Connection."
the Status window.
Band
In the USA, channels 1-11 are used. There are 3 non-overlapping channels
(1, 6, and 11). Auto channel should be selected to ensure that the channel
with the least interference is used.
802.11b,g,n
Deploying and Troubleshooting the Wireless Network
Apple Mac
1. Hold down the Option key and click on
the wireless icon (Airport) on the right
side of the top menu bar.
2. Information about the current wireless
connection appears below the SSID. If
you continue to hold the Option key and
hover over any network, information
about the connection is visible.
2.4GHz
84