Ubee DDW365 User Manual page 55

Ubee Interactive
Trigger Start Port
Trigger End Port
Target Start Port
Target End Port
Protocol
Description
Enabled
Apply
Clear All
5. Click Apply. The port trigger rule is created and displayed in the table. Additional field
descriptions are listed below the screen example.
Ubee DDW365 Advanced Wireless Gateway Subscriber User Guide • February 2014
Label
Defines a port number or the starting port number in a range
of trigger port numbers.
Defines a port number or the ending port number in a range of
trigger port numbers.
Defines a port number or the starting port number in a range
of target port numbers.
Defines a port number or the ending port number in a range of
target port numbers.
Defines the protocol type for this rule, UDP, TCP, or Both.
Names the triggering rule.
Enables (on) or disables (off) the triggering rule.
Saves changes.
Removes all of the input host's MAC addresses.
Using the Port Triggers Option
Description
51