Using The Advanced Option - Ubee DDW365 User Manual

Ubee Interactive
Generate AP PIN
WPS Add Client
Add a client
Client PIN
Authorized Client MAC
9.2.1 Enabling a Closed Network on the Primary Network
You can enable the Closed Network option so the SSID cannot be broadcast or seen by
others.
Steps
To enable a closed network:
1. Access the pull down menu for the Closed Network.
2. Choose Enabled to enable a closed network. Automatic Security Configuration is
disabled.
9.3

Using the Advanced Option

Use the Advanced option to configure data rates and Wi-Fi thresholds.
1. Click Wireless from the main menu.
2. Click Advanced from the left side menu. Field descriptions are listed below the screen
example.
Ubee DDW365 Advanced Wireless Gateway Subscriber User Guide • February 2014
Label
Creates a new PIN for this access point.
Activates wireless protected setup (WPS) security on the
device.
To add a client:
1. Click Add a client. The WPS Add Client screen is
2. Click PUSH on the WPS Add Client screen.The WPS
3. Press the WPS button on the device.
Defines a PIN number for client access.
Defines the MAC address of the authorized client.
Description
displayed.
button is activated on the device, indicated by a flashing
white light on top of the unit.

Using the Advanced Option

73