Using The Dhcp Option - Ubee DDW365 User Manual

Ubee Interactive
WAN Connection Type
IPv4 MTU Size
Apply
5.2

Using the DHCP Option

Use the DHCP option to configure dynamic host configuration protocol-specific behavior
on the device.
Steps
To configure DHCP settings:
1. Click Basic from the main menu.
2. Click DHCP from the left side menu. Field descriptions are listed below the screen
example.
Ubee DDW365 Advanced Wireless Gateway Subscriber User Guide • February 2014
Label
Selects the WAN connection type. For each type, different data
entry is required, as explained below:






Defines the maximum transmission unit (MTU) size. MTU
defines the largest size of the packet or frame that the device
can transfer (256-1500). If this is not given by your service
provider, use 0 for the default.
Saves changes.
Description
DHCP: The WAN interface is set to a DHCP client, and
the IP address is assigned by the service provider's DHCP
server.
Static IP: For Static IP, you must manually enter the IP
address for the WAN interface.
PPTP (dhcp): For Point to Point Tunneling Protocol
(PPTP), you must enter a username, password, and the
PPTP server's IP address.
PPTP (static):
L2TP (dhcp):
L2TP (static):
Using the DHCP Option
31