Using The Pass Through Option - Ubee DVW32CB Subscriber User Manual

Ubee Interactive
4. Click Apply. The port trigger rule is created and displayed in the table. Field
descriptions are listed below the screen example.
Note
The following example shows the Port Triggering option set up for a dual Xbox
configuration.
Trigger Start Port
Trigger End Port
Target Start Port
Target End Port
Protocol
Description
Enabled
Remove All
Edit
Remove
6.7

Using the Pass Through Option

Use the Pass Through option to configure a pass through table. Devices in the pass
through table are treated as bridge devices, storing and forwarding data between LAN
interconnections.
Ubee DVW32CB Advanced Wireless Voice Gateway Subscriber User Guide • January 2015
Label
Defines a port number or the starting port number in a range
of port numbers.
Defines a port number or the ending port number in a range of
port numbers.
Defines a port number or the starting port number in a range
of port numbers.
Defines a port number or the ending port number in a range of
port numbers.
Defines the protocol type for this rule, UDP, TCP, or Both.
Names the triggering rule.
Enables (on) or disables (off) the triggering rule.
Deletes all port triggering rules.
Allows you to edit a port triggering rule.
Deleted a port triggering rule.

Using the Pass Through Option

Description
59