Using The Port Filtering Option - Ubee DDW365 User Manual

Advanced wireless gateway
Hide thumbs Also See for DDW365:
Table of Contents

Advertisement

Ubee Interactive
4. Enter the MAC address to block in the text box to the left of the Add MAC Address
button.
5. Click the Add MAC Address button. The MAC address is displayed in the filtered
MAC address list. Field descriptions are listed below the screen example.
MAC Addresses
Add MAC Address
Addresses entered: n/20
Remove MAC Address
Clear All
6.4

Using the Port Filtering Option

Use the Port Filtering option to configure port filters to block to all devices on the LAN
Internet services that use the ports specified.
Steps
To configure port filters:
1. Click Advanced from the main menu.
2. Click Port Filtering from the left side menu. Field descriptions are listed below the
screen example.
Ubee DDW365 Advanced Wireless Gateway Subscriber User Guide • February 2014
Label
Defines the MAC address to block. Enter the MAC address in
the field.
Adds the MAC address to the list of addresses to block.
Displays the MAC addresses to be blocked. The number of
MAC addresses entered is shown as 1/20 where 1 is the
number of addresses in the list. You can filter up to twenty
MAC addresses at one time.
Deletes the selected MAC address from the list of addresses
to be blocked.
Removes all MAC addresses from the list.

Using the Port Filtering Option

Description
43

Advertisement

Table of Contents
loading

Table of Contents