Ubee DDW365 User Manual page 72

Ubee Interactive
Control Channel
Regulatory Mode
TPC Mitigation (dB)
OBSS Coexistence
STBC Tx
Apply
Restore Wireless Defaults
Scan Wireless APs
9.1.1 Scanning for Wireless Access Points (APs)
You can search for wireless access points and display the results in a new window.
Steps
To search for wireless access points:
1. Click Scan Wireless APs at the bottom of the Wireless Radio screen. Results are
displayed in a new window.
2. Click Refresh to update the results.
Ubee DDW365 Advanced Wireless Gateway Subscriber User Guide • February 2014
Label
Selects a specific channel to deploy the wireless network.
This allows you to set the operating frequency/channel
depending on your particular region. Channel selection can
have an impact on wireless networking performance. Control
Channel is set to Auto by default. For more information, refer
to
Defines whether Regulatory Mode is set to off, 802.11d, or
802.11h.
Defines the transmitter power control (TPC) mitigation setting
as 0 (off), 2, 3, or 4.
Enables or disables overlapping BSS coexistence.
Sets the space-time block codes (STBCs) for the transmitting
antenna.
Saves all screen changes when clicked.
Restores the factory default settings for wireless
configurations when clicked.
Scans for other wireless access points and displays channel,
encryption, SSID, RSSI levels, and other information.
Description
Selecting a Wireless Channel on page 85
Using the Wireless Radio Option
68