Using The Dhcp Option - Ubee DVW32CB Subscriber User Manual

Ubee Interactive
IPv6 DNS Servers
Release WAN Lease
Renew WAN Lease
WAN Connection Type
Host Name
Domain Name
IPv4 MTU Size
Apply
5.2

Using the DHCP Option

Use the DHCP option to configure dynamic host configuration protocol-specific behavior
on the device.
Steps
To configure DHCP settings:
1. Click Basic from the main menu.
2. Click DHCP from the left side menu. Field descriptions are listed below the screen
example.
Ubee DVW32CB Advanced Wireless Voice Gateway Subscriber User Guide • January 2015
Label
Lists the IPv6DNS servers available on the network.
Releases the WAN public IP address when clicked.
Renews the WAN IP address when clicked.
Selects the WAN connection type. For each type, different data
entry is required, as explained below:






Defines the host name for the router. This may be required by
some service providers.
Defines the domain name for the router. This may be required
by some service providers.
Defines the maximum transmission unit (MTU) size. MTU
defines the largest size of the packet or frame that the device
can transfer (256-1500). If this is not given by your service
provider, use 0 for the default.
Saves changes.
Description
DHCP: The WAN interface is set to a DHCP client, and
the IP address is assigned by the service provider's DHCP
server.
Static IP: For Static IP, you must manually enter the IP
address for the WAN interface.
PPTP (dhcp): For Point to Point Tunneling Protocol
(PPTP), you must enter a username, password, and the
PPTP server's IP address.
PPTP (static):
L2TP (dhcp):
L2TP (static):

Using the DHCP Option

33