Understanding Default Values And Logins - Ubee EVW32C Subscriber User Manual

Ubee Interactive
 Serial console (optional)
 Syslog
 WiFi radar
 Configuration backup and restore
 Spectrum analyzer
 TR-069 capable
Physical and Environmental
 Dimensions when positioned vertically: 182mm (D) x 237mm (H) x 80mm (W,
including product stand)
 Weight: 800g
 Power: 12V / 2.5A
 Operating Temperature: 0°C ~ 40°C
 Storage Temperature: -10°C ~ 70°C
 Operating Humidity: 10~90% (non-condensing)
1.5

Understanding Default Values and Logins

The EVW32C is pre-configured with the default parameters for the Service Provider.
Some regions may change default values using the cable modem or XML configuration
file. Check with your provisioning team to determine the default values for your region.
Local Port Address: 192.168.100.1
Web Interface: http://192.168.100.1
Operation Mode: NAT Mode
Subnet Mask: 255.255.255.0
Wireless Defaults:
 Primary SSID (WiFi network name) = The last 6 characters of the cable modem
MAC address. The SSIDs are the same for the 2.4GHz and 5GHz radio bands.
The SSIDs are printed on the device label.
 Example for a device with cable modem MAC address 68:14:01:24:A5:98 =
 If the subscriber changes the SSID, the device does not revert to this default
 The SSID can also be found on the WLAN Basic screen. Refer to
 Encryption Method = Auto
 WPA Pre-shared Key = A unique key for each device, also called the network key,
the wireless key, or the wireless password. The pre-shared key for the EVW32C is
the 14 characters of the device serial number.
Example Pre-Shared Key: EVW32C00000060
Ubee EVW32C Advanced Wireless Voice Gateway Subscriber User Manual • March 2017
24A598
SSID when the device is reset, except when a manual factory reset is
performed through the Web UI.
Basic Option on page 37.

Understanding Default Values and Logins

Using the
10