Codec Configuration; Call Feature Setting - ATCOM Rainbow1 User Manual

Rainbow1 IP Phone User Manual
16. RPort Enable: Select "Yes" or "No" to enable or disable rport.
17. Session Timer Enable：Select "Yes" or "No" to enable or disable Session Timer.
18. Early Update Enable：Select "Yes" or "No" to enable or disable Early Update.
19. Caller ID Display: Select "Yes" or "No" to enable or disable Caller ID display
20. AutoSubscribeMWIEnable：Select "Yes" or "No" to enable or disable
SubscribeMWI
21. Server List：Choose the server type.
22. DNS Mode: Choose the DNS mode
23. BLF List URI: Set BLF list URI when Rainbow1 cooperates with Broadworks
(Broadsoft).
 Codec Configuration
1. Disabled Codec: Select disallowed codec for all calls.
2. Enabled Codec Only: Select allowed codec for all calls. The priority of each
enabled codec decreases one by one. However, the actual codec used in a call
depends on the outcome of the codec negotiation protocol.
 DTMF Configuration
1. DTMF Tx Method: Select the method to transmit DTMF signals to the remote
end: Inband, RFC2833, SIP INFO. Defaults to RFC2833.
2. DTMF Display: Select "Yes" or "No" to enable or disable display DTMF.
 Call Feature Setting
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn
34