Digital Projection E-Vision 8000 Series User Manual page 40

Digital Projection
E-Vision 8000 series
LAMPS Menu
Mode
•
Set this to Single or Dual as required.
When the mode is changed, it will not be possible to change it again within five minutes.
Power
•
Set this to for 100% power,
Normal
Custom Power slider.
High Altitude Mode
•
Set this to On if it is necessary to have the cooling fans running at high speed.
Custom Power
•
Set the slider as required.
Lamp Status and Time
•
For information only.
Rev A April 2012
for 80% power or to enable the
Eco Custom
A TOUR OF THE MENUS Operating Guide
Notes
See also Using the Menus, earlier
in this guide and Menu Map, later in
this guide.
When is set to ,
Lamp Mode Single
the projector will turn on using the
lamp with the least hours of use.
To protect the lamps from thermal
shock, it will not be possible to
change the more than
Lamp Mode
once within five minutes.
The setting should be set
Power
to Custom , if you want to use the
Custom Power slider.
Page Op_12