Selecting Parameters - Digital Projection E-Vision 8000 Series User Manual

Digital Projection
E-Vision 8000 series

Selecting parameters

Most parameters are changed by selecting
from a list:
•
Select from the list using
and .
•
The change will usually be made
immediately.
Some parameters are changed by selecting
from a sub menu.
•
Press ENTER to open the menu.
The sub menu appears to the left or
right side, or in place of the menu
it was called from, depending on the
space available.
•
The item that is currently selected is
marked with a block: .
•
Select from the sub menu using
and .
•
The change will be made when you
press ENTER to confirm the selection.
Rev A April 2012
USING THE MENUS Operating Guide
Notes
Some menu options and controls
may not be available due to settings
in other menus. These will be
shaded grey on the actual menu.
There may be a short delay when
changing some parameters, due to
internal processing time.
The sub menu appears to the left
or right side, or in place of the
menu it was called from, depending
on the space available.
Page Op_5