9.3 Smart QoS
The smart QoS function enables the administrators to constrain the bandwidth occupied
automatically without any configuring.
Enabled QoS:
When the usage of any WAN's bandwidth is
over than___%, Enable Smart QoS
Each IP's upstream bandwidth threshold
(for all WAN):
Each IP's downstream bandwidth threshold
(for all WAN) :
If any IP's bandwidth is over maximum
threshold, its maximum bandwidth will
remain:
Enabled Penalty Mechanism:
Show Penalty IP:
Choose to apply QoS function.
Input the required rate value into the column. The
default is 60%.
Input the max. upstream rate for intranet IPs.
Input the max. downstream rate for intranet IPs.
When any IP uses more bandwidth than the above
upstream or downstream settings, the IP will be
restricted for the following upstream or downstream
bandwidth settings.
After choosing "Enabled Penalty Mechanism", the
device will enable the penalty conditions internally.
When the IP still uses more upstream or downstream
bandwidth than the setting, the device will execute the
penalty conditions automatically.
The IPs which are under penalty mechanism will be
shown on the list.
98
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
V
P
N
Q
o
S
W
i
r
e
l
e
s
s
R
o
u
t
e
r
t
e
r